Įspėjimai
Šiame tinklalapyje pateikiama prietaisų, palaikančių "OpenWrt" sistemą, programinė įranga, prieš atsisiųsdami ir įdiegdami programinę įrangą, atkreipkite dėmesį, kad "OpenWrt" projektas yra "Linux" operacinė sistema, skirta įterptiesiems prietaisams. Užuot bandžiusi sukurti vieną statišką programinę įrangą, "OpenWrt" pateikia visiškai įrašomą failų sistemą su paketų valdymu. Tai išlaisvina jus nuo gamintojo teikiamų programų pasirinkimo ir konfigūravimo ir leidžia naudojant paketus pritaikyti įrenginį taip, kad jis tiktų bet kokiai programai. Kūrėjams "OpenWrt" - tai sistema, leidžianti sukurti programą, nesukuriant aplink ją visos programinės įrangos; naudotojams tai reiškia galimybę visiškai pritaikyti įrenginį ir naudoti jį taip, kaip niekada nebuvo numatyta.
Aprašymas
- Šį failą galima naudoti tik tada, kai jūsų maršrutizatorius veikia su Cudy žiniatinklio vartotojo sąsaja.
- Jeigu maršrutizatorius jau veikia pagal "OpenWRT" vartotojo sąsają, naudotojas pirmiausia turėtų atkurti oficialią Cudy programinę įrangą. Tada atnaujinti maršrutizatorių su šia programine įranga.
- Kaip atkurti maršrutizatorių į oficialią Cudy programinę įrangą? Perskaitykite parsisiųstame faile esančią "readme" informaciją.
Garantija:
Cudy pareiškia
- Mes, Cudy, neprisiimame garantijos jokiai programinei įrangai, kurią išleido ne "Shenzhen Cudy Technology Co., Ltd." .
- Mes neprisiimame jokios garantijos produktams, kuriuose įdiegta bet kokia programinė įranga, kurios neišleido Shenzhen Cudy Technology Co, Ltd. .
- Jei jums reikia naudoti "openwrt" programinę įrangą, siūlome ją atsisiųsti iš oficialios Cudy svetainės.
Sisiųskite "OpenWrt" programinę įrangą, kad pašalintumėte parašo patikrą: Drive
ApenWrt firmware ieškiklis (neišleido Cudy): OpenWrt Firmware Selector
1319 comments
I, just bought a new WR3000 v2 in europe (on amazon). Seems good hardware, but there’s no firmware with signature removal available.
Please support help us (I will ask for a refound on Amazon otherwise !!!)
@Dear Alexei,
Please download the WR3000+V1 without recovery TFTP.zip in the google drive.
“Hello Cudy Support Team,
I have a Cudy WR3000 v1.0 router.
Serial Number 255306528
I would like to install OpenWrt on my router. Could you please provide the Cudy-signed intermediate firmware compatible with my hardware revision?
Thank you.”
“Hello Cudy Support Team,
I have a Cudy WR3000 v1.0 router.
Serial Number 255306528
I would like to install OpenWrt on my router. Could you please provide the Cudy-signed intermediate firmware compatible with my hardware revision?
Thank you.”
@Уважаемый Никита,
Нет, прошивки OpenWRT для WR3600H 1.0 нет. Мы не планируем добавлять поддержку X-Ray.
“добрый день. подскажите когда выйдет для WR3600H 1.0 сделаете нормальную прошивку под openwrt или добавите xray для модели WR3600H 1.0”
@Dear Roman,
TR3000 V1_20251118.zip is the correct one. Please unzip the file before update.
“Hello Cudy Support. I have a Cudy TR3000 V1.0, serial number TR3000255201678 (SN code 2552, so this unit has the new flash chip F50L1G41LC). I would like to install OpenWrt. The Google Drive folder only has the older TR3000 intermediate firmware (“TR3000 V1_20251118.zip”), which per your November 24, 2025 notice is not compatible with the new flash. Could you please send/provide the correct new-flash intermediate (signature-removal) firmware for the TR3000 V1.0? Thank you very much!”
@Dear Ilya,
No, The OpenWrt firmware is not developed by Cudy but by the developers. We need the OpenWrt forum official support the router at first, then we can release a middle firmware for you, then you can use and upgrade to the OpenWrt firmware.
“Hello, could you provide the OpenWrt firmware for the WR3000 V2.0? There is no intermediate version available on Google Drive.”