Įspėjimai
Šiame tinklalapyje pateikiama prietaisų, palaikančių "OpenWrt" sistemą, programinė įranga, prieš atsisiųsdami ir įdiegdami programinę įrangą, atkreipkite dėmesį, kad "OpenWrt" projektas yra "Linux" operacinė sistema, skirta įterptiesiems prietaisams. Užuot bandžiusi sukurti vieną statišką programinę įrangą, "OpenWrt" pateikia visiškai įrašomą failų sistemą su paketų valdymu. Tai išlaisvina jus nuo gamintojo teikiamų programų pasirinkimo ir konfigūravimo ir leidžia naudojant paketus pritaikyti įrenginį taip, kad jis tiktų bet kokiai programai. Kūrėjams "OpenWrt" - tai sistema, leidžianti sukurti programą, nesukuriant aplink ją visos programinės įrangos; naudotojams tai reiškia galimybę visiškai pritaikyti įrenginį ir naudoti jį taip, kaip niekada nebuvo numatyta.
Aprašymas
- Šį failą galima naudoti tik tada, kai jūsų maršrutizatorius veikia su Cudy žiniatinklio vartotojo sąsaja.
- Jeigu maršrutizatorius jau veikia pagal "OpenWRT" vartotojo sąsają, naudotojas pirmiausia turėtų atkurti oficialią Cudy programinę įrangą. Tada atnaujinti maršrutizatorių su šia programine įranga.
- Kaip atkurti maršrutizatorių į oficialią Cudy programinę įrangą? Perskaitykite parsisiųstame faile esančią "readme" informaciją.
Garantija:
Cudy pareiškia
- Mes, Cudy, neprisiimame garantijos jokiai programinei įrangai, kurią išleido ne "Shenzhen Cudy Technology Co., Ltd." .
- Mes neprisiimame jokios garantijos produktams, kuriuose įdiegta bet kokia programinė įranga, kurios neišleido Shenzhen Cudy Technology Co, Ltd. .
- Jei jums reikia naudoti "openwrt" programinę įrangą, siūlome ją atsisiųsti iš oficialios Cudy svetainės.
Sisiųskite "OpenWrt" programinę įrangą, kad pašalintumėte parašo patikrą: Drive
ApenWrt firmware ieškiklis (neišleido Cudy): OpenWrt Firmware Selector
1319 comments
@Dear Bourn,
I need check it with our R&D team first.
“Dear Support,
AP3000D uses the same chipset as other AP3000 models, so the firmware should work. I would like to test this. If it does not work, I will build the required firmware from source.
https://downloads.openwrt.org/releases/25.12.0/targets/mediatek/filogic/openwrt-25.12.0-mediatek-filogic-cudy_ap3000-v1-squashfs-sysupgrade.bin"
help mi !!
File is invalid. Please retry.
Uploaded File: openwrt-25.12.0-mediatek-filogic-cudy_ap3000wall-v1-squashfs-sysupgrade.bin
Size: 9.00 MB (9441562 B)
MD5: 72827a30761e73dee7020e58c7d7c477
Dear Support,
AP3000D uses the same chipset as other AP3000 models, so the firmware should work. I would like to test this. If it does not work, I will build the required firmware from source.
https://downloads.openwrt.org/releases/25.12.0/targets/mediatek/filogic/openwrt-25.12.0-mediatek-filogic-cudy_ap3000-v1-squashfs-sysupgrade.bin
@Dear Timur,
OK, We will offer you later. Please wait patiently.
“Hello support!
I was create prereleased OpenWRT binary for Cudy WR1300S.
This kernel https://github.com/5yoda5/openwrt/releases/download/first_release/openwrt-ramips-mt7621-cudy_wr1300s-initramfs-kernel.bin
and Sysupgrade https://github.com/5yoda5/openwrt/releases/download/first_release/openwrt-ramips-mt7621-cudy_wr1300s-squashfs-sysupgrade.bin
Can you make intermediate transition firmware to switch from stock firmware to OpenWRT ?”
@Dear Bourn,
We need the OpenWrt forum official support the router at first, then we can release a middle firmware for you, then you can use and upgrade to the OpenWrt firmware. Do you have the OpenWrt firmware for AP3000D? If yes, please share it to us.
“Hello Cudy Support,
Could you please send me the intermediate firmware for the AP3000D?
I would like to test installing custom OpenWRT firmware.
Best regards"