Įspėjimai
Šiame tinklalapyje pateikiama prietaisų, palaikančių "OpenWrt" sistemą, programinė įranga, prieš atsisiųsdami ir įdiegdami programinę įrangą, atkreipkite dėmesį, kad "OpenWrt" projektas yra "Linux" operacinė sistema, skirta įterptiesiems prietaisams. Užuot bandžiusi sukurti vieną statišką programinę įrangą, "OpenWrt" pateikia visiškai įrašomą failų sistemą su paketų valdymu. Tai išlaisvina jus nuo gamintojo teikiamų programų pasirinkimo ir konfigūravimo ir leidžia naudojant paketus pritaikyti įrenginį taip, kad jis tiktų bet kokiai programai. Kūrėjams "OpenWrt" - tai sistema, leidžianti sukurti programą, nesukuriant aplink ją visos programinės įrangos; naudotojams tai reiškia galimybę visiškai pritaikyti įrenginį ir naudoti jį taip, kaip niekada nebuvo numatyta.
Aprašymas
- Šį failą galima naudoti tik tada, kai jūsų maršrutizatorius veikia su Cudy žiniatinklio vartotojo sąsaja.
- Jeigu maršrutizatorius jau veikia pagal "OpenWRT" vartotojo sąsają, naudotojas pirmiausia turėtų atkurti oficialią Cudy programinę įrangą. Tada atnaujinti maršrutizatorių su šia programine įranga.
- Kaip atkurti maršrutizatorių į oficialią Cudy programinę įrangą? Perskaitykite parsisiųstame faile esančią "readme" informaciją.
Garantija:
Cudy pareiškia
- Mes, Cudy, neprisiimame garantijos jokiai programinei įrangai, kurią išleido ne "Shenzhen Cudy Technology Co., Ltd." .
- Mes neprisiimame jokios garantijos produktams, kuriuose įdiegta bet kokia programinė įranga, kurios neišleido Shenzhen Cudy Technology Co, Ltd. .
- Jei jums reikia naudoti "openwrt" programinę įrangą, siūlome ją atsisiųsti iš oficialios Cudy svetainės.
Sisiųskite "OpenWrt" programinę įrangą, kad pašalintumėte parašo patikrą: Drive
ApenWrt firmware ieškiklis (neišleido Cudy): OpenWrt Firmware Selector
1319 comments
@Tadeusz
Dear Customer.
Thank you for contacting Cudy support team.
The new IP address of the router after update the intermediate firmware is 192.168.1.1 255.255.255.0, please try again. If still can’t login to the web page. Please try to recover the firmware to Cudy firmware according to the instruction on the website.
https://www.cudy.com/blogs/faq/how-to-recovery-the-cudy-router-from-openwrt-firmware-to-cudy-official-firmware?pos=1&_sid=75e4fd020&ss=r
Then update the OpenWrt firmware again.
“Hi Cudy Support,
I followed your manual – First update the intermediate firmware from GoogleDrive to remove signature. Second Use https://firmware-selector.openwrt.org/?version=24.10.0&target=mediatek%2Ffilogic&id=cudy_wr3000s-v1.
I uploaded intermediate via GUI. My router WR3000s rebooted itself. Now only system LED is turned on and WAN and LAN1. I cannot get via any 192.168.×.×.
Could you help in this case, please?
Regards,
Tadeusz”
It seems something has changed in the bootloader installed with the latest WR300 firmware (WR300-R54-2.2.8-20241015-162008-flash) – after downgrade to the older version (WR300-R54-1.16.15-20231130-131612-flash) I can see normal messages at 115200 again, no more garbage.
Could you tell me how to stop u-boot so I can load the OpenWrt image (built by me, not signed by you) – it boots the original firmware from flash without any delay, and no Linux shell access is possible.
@Paco,
Dear Paco Mercado,
Thank you for contacting Cudy support team. For now we don’t have plan to develop OpenWrt firmware. We will provide feedback to the R&D department for evaluation.
“Wouln’t make more sense if Cudy would contribute to the OpenWRT project directly?
Your firmware is based on OpenWRT, so it would be a way to give back to the community and, also, facilitate a path for us, non tech-savy people, to use more up to date versions.
I understand you might want to keep you “secret sauce” under wraps, but if there’s a will, there’s a way…”
,
Thank you for contacting Cudy support team. For now we don’t have plan to develop OpenWrt firmware. We will provide feedback to the R&D department for evaluation.
“Wouln’t make more sense if Cudy would contribute to the OpenWRT project directly?
Your firmware is based on OpenWRT, so it would be a way to give back to the community and, also, facilitate a path for us, non tech-savy people, to use more up to date versions.
I understand you might want to keep you “secret sauce” under wraps, but if there’s a will, there’s a way…”
@Denis,
Dear Denis,
The AP3000 doesn’t support to recover to Cudy firmware via TFTP now. We have plan to add this feature in future.
“Hello Cudy team,
I found that VLAN support in Cudy AP3000 is not up to the features I expected from business-oriented device (unfortunately after purchase). I would like to switch to OpenWrt (it now supports AP3000) to see if it can be done with that OS. But I found out that it will be impossible to recover to Cudy firmware, because tftp restore is not available in this AP. Do you have plans to resolve this issue with firmware update, or it is limited in hardware? Should I better return this AP and give up?"
@Tadeusz
Dear Tadeusz,
Yes, you are right. First update the intermediate firmware from GoogleDrive to remove signature. Second Use https://firmware-selector.openwrt.org/?version=24.10.0&target=mediatek%2Ffilogic&id=cudy_wr3000s-v1.
“Hello my friend,
I was looking forward the latest OpenWrt 24.10.0 stable version. Finally it was released. I would like to upload it into my Cudy WR3000S v1. Should I follow your instruction above:
1/ Remove signature check from GoogleDrive.
2/ Use https://firmware-selector.openwrt.org/?version=24.10.0&target=mediatek%2Ffilogic&id=cudy_wr3000s-v1
or
to be 100% sure download OpenWrt from Cudy’s official website (but cannot find it yet)?
Regards,
Tadeusz"