Įspėjimai
Šiame tinklalapyje pateikiama prietaisų, palaikančių "OpenWrt" sistemą, programinė įranga, prieš atsisiųsdami ir įdiegdami programinę įrangą, atkreipkite dėmesį, kad "OpenWrt" projektas yra "Linux" operacinė sistema, skirta įterptiesiems prietaisams. Užuot bandžiusi sukurti vieną statišką programinę įrangą, "OpenWrt" pateikia visiškai įrašomą failų sistemą su paketų valdymu. Tai išlaisvina jus nuo gamintojo teikiamų programų pasirinkimo ir konfigūravimo ir leidžia naudojant paketus pritaikyti įrenginį taip, kad jis tiktų bet kokiai programai. Kūrėjams "OpenWrt" - tai sistema, leidžianti sukurti programą, nesukuriant aplink ją visos programinės įrangos; naudotojams tai reiškia galimybę visiškai pritaikyti įrenginį ir naudoti jį taip, kaip niekada nebuvo numatyta.
Aprašymas
- Šį failą galima naudoti tik tada, kai jūsų maršrutizatorius veikia su Cudy žiniatinklio vartotojo sąsaja.
- Jeigu maršrutizatorius jau veikia pagal "OpenWRT" vartotojo sąsają, naudotojas pirmiausia turėtų atkurti oficialią Cudy programinę įrangą. Tada atnaujinti maršrutizatorių su šia programine įranga.
- Kaip atkurti maršrutizatorių į oficialią Cudy programinę įrangą? Perskaitykite parsisiųstame faile esančią "readme" informaciją.
Garantija:
Cudy pareiškia
- Mes, Cudy, neprisiimame garantijos jokiai programinei įrangai, kurią išleido ne "Shenzhen Cudy Technology Co., Ltd." .
- Mes neprisiimame jokios garantijos produktams, kuriuose įdiegta bet kokia programinė įranga, kurios neišleido Shenzhen Cudy Technology Co, Ltd. .
- Jei jums reikia naudoti "openwrt" programinę įrangą, siūlome ją atsisiųsti iš oficialios Cudy svetainės.
Sisiųskite "OpenWrt" programinę įrangą, kad pašalintumėte parašo patikrą: Drive
ApenWrt firmware ieškiklis (neišleido Cudy): OpenWrt Firmware Selector
900 comments
@Mike,
Dear Customer,
Our technical support has sent you the intermediate firmware via email. Please check.
“Hi Team,
I wanted to download intermediary firmware from https://drive.google.com/drive/folders/1BKVarlwlNxf7uJUtRhuMGUqeCa5KpMnj for my WR3000 but Microsoft Defender recognized this file as a virus: “AndroidOS/ZkarletFlash” – can you elaborate on that please? Thank you."
Hi Team,
I wanted to download intermediary firmware from https://drive.google.com/drive/folders/1BKVarlwlNxf7uJUtRhuMGUqeCa5KpMnj for my WR3000 but Microsoft Defender recognized this file as a virus: “AndroidOS/ZkarletFlash” – can you elaborate on that please? Thank you.
@Michael,
Dear,
We have plan to develop the intermediate firmware in near future, please wait. I will send it to you when we done.
“Hi Cudy support, i’m interrested too in runing openwrt on my ap3000 ceiling ap, tested this build and it boot very long over uart, but after it loads it works very well, and now i want to flash it thru web panel, when we get transit firmware? Thanks”
Hi,
I purchased the Cudy WR1300 one week ago. I have faced a lot of problems:
1. Overheating: It becomes too hot easily.
2. Bandwidth limit (QoS): It doesn’t allow me to set a kbps speed limit for clients. Even I can’t set a fractional number like 0.5 Mbps. The lowest value is 1 Mbps.
3. I couldn’t find the LED control feature; I find this disturbing while sleeping.
4. It has a simple app, which doesn’t have any special features like MAC filter or bandwidth control.
5. I have used a Tenda router for a long time. It had all the features and a beautifully easy-to-control interface. I could limit bandwidth from the same interface. I didn’t need to find the QoS or MAC filter option. Also, all the LED control, easy whitelist filtering, everything. Additionally, I used to receive regular updates. The router used to save offline device info as well.
I am using the latest version (v3) of the Cudy WR1300, firmware version 2.26. Now, what should I do?
Hi Cudy support, i’m interrested too in runing openwrt on my ap3000 ceiling ap, tested this build and it boot very long over uart, but after it loads it works very well, and now i want to flash it thru web panel, when we get transit firmware? Thanks