Įspėjimai
Šiame tinklalapyje pateikiama prietaisų, palaikančių "OpenWrt" sistemą, programinė įranga, prieš atsisiųsdami ir įdiegdami programinę įrangą, atkreipkite dėmesį, kad "OpenWrt" projektas yra "Linux" operacinė sistema, skirta įterptiesiems prietaisams. Užuot bandžiusi sukurti vieną statišką programinę įrangą, "OpenWrt" pateikia visiškai įrašomą failų sistemą su paketų valdymu. Tai išlaisvina jus nuo gamintojo teikiamų programų pasirinkimo ir konfigūravimo ir leidžia naudojant paketus pritaikyti įrenginį taip, kad jis tiktų bet kokiai programai. Kūrėjams "OpenWrt" - tai sistema, leidžianti sukurti programą, nesukuriant aplink ją visos programinės įrangos; naudotojams tai reiškia galimybę visiškai pritaikyti įrenginį ir naudoti jį taip, kaip niekada nebuvo numatyta.
Aprašymas
- Šį failą galima naudoti tik tada, kai jūsų maršrutizatorius veikia su Cudy žiniatinklio vartotojo sąsaja.
- Jeigu maršrutizatorius jau veikia pagal "OpenWRT" vartotojo sąsają, naudotojas pirmiausia turėtų atkurti oficialią Cudy programinę įrangą. Tada atnaujinti maršrutizatorių su šia programine įranga.
- Kaip atkurti maršrutizatorių į oficialią Cudy programinę įrangą? Perskaitykite parsisiųstame faile esančią "readme" informaciją.
Garantija:
Cudy pareiškia
- Mes, Cudy, neprisiimame garantijos jokiai programinei įrangai, kurią išleido ne "Shenzhen Cudy Technology Co., Ltd." .
- Mes neprisiimame jokios garantijos produktams, kuriuose įdiegta bet kokia programinė įranga, kurios neišleido Shenzhen Cudy Technology Co, Ltd. .
- Jei jums reikia naudoti "openwrt" programinę įrangą, siūlome ją atsisiųsti iš oficialios Cudy svetainės.
Sisiųskite "OpenWrt" programinę įrangą, kad pašalintumėte parašo patikrą: Drive
ApenWrt firmware ieškiklis (neišleido Cudy): OpenWrt Firmware Selector
1319 comments
@Dear Connect,
Did you unzip the firmware before update?
“Hello,
I have recently purchased the C200P controller, the SN starts with 2531. I would like to use it just as a router with the ability to do Vlans, hence I tried to flash it with OpenWrt. I followed the instructions everywhere with the 2 step (intermediary first then OpenWrt) but the device is not even accepting the intermediary flash that i downloaded and unzipped following the link to the google drive files, instead I get: “File is not compatible with the device model(s).” I have tried with multiple browsers also!
Current firmware on the C200P is 2.4.7 (11-Feb-2026)
Any ideas?
Kind regards.”
@Dear ali,
Sorry to tell you that there is no OpenWrt firmware for LT18 currently. The OpenWrt firmware is not developed by Cudy but by the developers. We need the OpenWrt forum official support the router at first, then we can release a middle firmware for you, then you can use and upgrade to the OpenWrt firmware.
“hello is the openwrt for cudy lt18 ax 1800 please ? or i just want to install v2ray vpn in my router”
@Уважаемый Вадимка,
AP3000 поддерживает функцию VLAN SSID после обновления до последней версии прошивки. А AP3000D — нет. Кроме того, вы можете обновить прошивку AP3000 до OpenWrt. Существуют промежуточные и стандартные прошивки OpenWrt для AP3000.
“ap3000 ap3000d очень нуждаются в OpenWrt, вроде позиционируют себя как точки доступа а даже банальной работы с vlan нет, поправьте пожалуйста”
@Dear Hasan,
Sorry to tell you that there is no OpenWrt firmware for WR1500 currently.
“Cudy wr1500 need firmware”
Hello,
I have recently purchased the C200P controller, the SN starts with 2531. I would like to use it just as a router with the ability to do Vlans, hence I tried to flash it with OpenWrt. I followed the instructions everywhere with the 2 step (intermediary first then OpenWrt) but the device is not even accepting the intermediary flash that i downloaded and unzipped following the link to the google drive files, instead I get: “File is not compatible with the device model(s).” I have tried with multiple browsers also!
Current firmware on the C200P is 2.4.7 (11-Feb-2026)
Any ideas?
Kind regards.