Įspėjimai
Šiame tinklalapyje pateikiama prietaisų, palaikančių "OpenWrt" sistemą, programinė įranga, prieš atsisiųsdami ir įdiegdami programinę įrangą, atkreipkite dėmesį, kad "OpenWrt" projektas yra "Linux" operacinė sistema, skirta įterptiesiems prietaisams. Užuot bandžiusi sukurti vieną statišką programinę įrangą, "OpenWrt" pateikia visiškai įrašomą failų sistemą su paketų valdymu. Tai išlaisvina jus nuo gamintojo teikiamų programų pasirinkimo ir konfigūravimo ir leidžia naudojant paketus pritaikyti įrenginį taip, kad jis tiktų bet kokiai programai. Kūrėjams "OpenWrt" - tai sistema, leidžianti sukurti programą, nesukuriant aplink ją visos programinės įrangos; naudotojams tai reiškia galimybę visiškai pritaikyti įrenginį ir naudoti jį taip, kaip niekada nebuvo numatyta.
Aprašymas
- Šį failą galima naudoti tik tada, kai jūsų maršrutizatorius veikia su Cudy žiniatinklio vartotojo sąsaja.
- Jeigu maršrutizatorius jau veikia pagal "OpenWRT" vartotojo sąsają, naudotojas pirmiausia turėtų atkurti oficialią Cudy programinę įrangą. Tada atnaujinti maršrutizatorių su šia programine įranga.
- Kaip atkurti maršrutizatorių į oficialią Cudy programinę įrangą? Perskaitykite parsisiųstame faile esančią "readme" informaciją.
Garantija:
Cudy pareiškia
- Mes, Cudy, neprisiimame garantijos jokiai programinei įrangai, kurią išleido ne "Shenzhen Cudy Technology Co., Ltd." .
- Mes neprisiimame jokios garantijos produktams, kuriuose įdiegta bet kokia programinė įranga, kurios neišleido Shenzhen Cudy Technology Co, Ltd. .
- Jei jums reikia naudoti "openwrt" programinę įrangą, siūlome ją atsisiųsti iš oficialios Cudy svetainės.
Sisiųskite "OpenWrt" programinę įrangą, kad pašalintumėte parašo patikrą: Drive
ApenWrt firmware ieškiklis (neišleido Cudy): OpenWrt Firmware Selector
1530 komentarai (-ų)
@Dear mousegg,
cudy_wr3000h-v1-sysupgrade_20251119.bin is the correct file.
“Hello Cudy Support,
I have a Cudy WR3000H V1.0 (EU).
Router information:
Model: WR3000H_EU V1.0
Serial Number: WR3000H254300*** EU 1.0
Stock Firmware: 2.4.5 US
I would like to install the official OpenWrt firmware.
I understand that routers with SN 2543 or later require the new OpenWrt intermediate firmware for the F50L1G41LC flash.
I found the intermediate firmware:
cudy_wr3000h-v1-sysupgrade_20251119.bin
However, I understand that some WR3000H units with the F50L1G41LC flash and Motorcomm YT8821 WAN PHY report “File is invalid” when using this image.
Could you please provide me with the correct Cudy-signed OpenWrt intermediate firmware specifically compatible with my hardware revision?
I would then like to upgrade to an official OpenWrt version 24.10.5 or newer."
@Dear dreamyswigs,
Our technical support has sent you the firmware via email. Please check.
“TR3000-256MB EAEU1.0 — request for intermediate firmware and recovery file
Hello Cudy Support,
I sent this request to support@cudy.com on September 28 and again on September 29 (full S/N included in the emails), but have not received a reply yet, so I am posting here as well.
- Model: TR3000-256MB, EAEU1.0
- Production week in S/N: 2623
- Current stock firmware: 2.5.27-20260804-190139
I have NOT flashed anything yet. Another TR3000 256MB owner (S/N week 2626) reported on your recovery FAQ page on September 26 that the router stopped booting after flashing the intermediate firmware from the TR3000-256MB download page (DTS_and_intermediate_firmware, May 2025) on top of stock 2.5.21. My stock firmware is even newer and is not listed on the download page, so I want to confirm compatibility before flashing.
Could you please send me by email:
1. The intermediate firmware confirmed to work with my unit and stock 2.5.27.
2. The stock firmware for TFTP recovery (recovery.bin), ideally 2.5.27.
3. Which NAND flash chip is used in TR3000-256MB units from this batch.
4. Which OpenWrt image to install afterwards (cudy_tr3000-256mb-v1-squashfs-sysupgrade.bin from OpenWrt 25.12.x?).
Thank you!"
@Dear Charizma,
Sorry, no, we can’t change the Country code via firmware update.
“Cudy x6 v2
Hi, I bought a Cudy X6 v2, but it doesn’t have 5GHz DFS FCC channels. Could you please send me the US firmware? I would really appreciate it. Thank you."
@Dear Dmitry,
Our technical support has sent you the firmware via email. Please check.
“Hello.
I have a Cudy WR3000H V1.0.
Serial number: S0001004261801871
Current stock firmware: 2.4.5-20250515-105059
I would like to install the latest official OpenWrt.
Please send me the latest Cudy-signed OpenWrt intermediate firmware compatible with my WR3000H V1.0 and the new Flash revision.
Thank you."
@Dear Misha Gorbunov,
cudy_m3000-v1-sysupgrade__20251119.bin is the correct firmware for your router.
“Hello Cudy Support,
I have a Cudy M3000 v2.0 (board R37) with Motorcomm YT8821 WAN PHY and ESMT F50L1G41LC SPI NAND. It is currently running stock firmware 2.4.19-20250828.
I want to install official OpenWrt 25.12.5. The M3000 1.0_2.0.zip archive contains cudy_m3000-v1-sysupgrade__20251119.bin, but this image refers to rtl8221b_phy, while my router has YT8821.
Could you please email me a Cudy-signed intermediate firmware confirmed to support this exact hardware combination? Please also confirm which OpenWrt image I should install afterward and provide the installation steps. I have not flashed the router yet.
Thank you!"