Šiame straipsnyje rasite patarimų, kaip atidaryti papildomą Wi-Fi ryšį svečiams. Jis teiks tik interneto ryšį ir atskirai nuo pagrindinio tinklo. Pavyzdžiui, prisijungus prie svečių tinklo, įrenginys negali prisijungti prie vietinio tinklo, negali prisijungti prie žiniatinklio sąsajos ir t. t.
Pastaba: Svečių tinklas nepasiekiamas prieigos taško režimu.
1 žingsnis: Atidarykite interneto naršyklę ir eikite į http://cudy.net arba http://192.168.10.1.
Detalesnę informaciją rasite Kaip prisijungti prie "Cudy Router" žiniatinklio sąsajos?
2. žingsnis: Eikite į Išplėstiniai nustatymai->Gyventojų tinklas.
Trečias žingsnis: Sukurkite 2,4 GHz arba 5 GHz svečių tinklą pagal savo poreikius.
Pagal numatytuosius nustatymus svečių tinklas yra atviras Wi-Fi tinklas, pavadintas "Cudy-Guest-2.4G" arba "Cudy-Guest-5G".
4 žingsnis: NustatykiteŠifravimas į WPA-PSK/WPA2-PSK mišrųjį režimą, tada nustatykite lengvai įsimenamą slaptažodį.
5 etapas: "Išsaugoti & Taikyti"nustatymus. Dabar galite prisijungti prie savo svečių tinklo naudodami SSID ir slaptažodį, kuriuos nustatėte.
Neįjunkite Slėpto tinklo, nebent norite rankiniu būdu įvesti šį SSID Wi-Fi prieigai.
90 comments
Access point without guest network just for home use , so here in Europe much better to use tplink at same price
@Kevin,
Dear Customer,
Thank you for contacting Cudy support team. Our technical support has contacted you via email. Please check.
“Setup AX3000 mesh, 1 x router mode, 5 x mesh.
All connected via ethernet.
LAN and WLAN works as expected, for main network, all mesh units working via wifi and wired lan connected devices.
Issue: Guest Network only connects when device placed next to main router, does not connect when connecting to mesh units.
Tried with and without encryption, does not seem to be getting connections via mesh units, ssid signal, but not device authentication or connection allowed.”
Setup AX3000 mesh, 1 x router mode, 5 x mesh.
All connected via ethernet.
LAN and WLAN works as expected, for main network, all mesh units working via wifi and wired lan connected devices.
Issue: Guest Network only connects when device placed next to main router, does not connect when connecting to mesh units.
Tried with and without encryption, does not seem to be getting connections via mesh units, ssid signal, but not device authentication or connection allowed.
@drake,
Dear Customer,
Our technical support has relpied you via email. Please check.
“WR3000H, latest firmware (WR3000-R31-2.2.6-20240902-033948), but Guest Wifi is nor working (two same devices in Mesh). No client can connect. Of course, encryption is on, and only 2,4GHz band. Any way to fix this? Thanks”
WR3000H, latest firmware (WR3000-R31-2.2.6-20240902-033948), but Guest Wifi is nor working (two same devices in Mesh). No client can connect. Of course, encryption is on, and only 2,4GHz band. Any way to fix this? Thanks