WISP režimas:
WISP režimu maršrutizatorius leidžia keliems naudotojams dalytis WISP interneto ryšiu. Tokiu būdu LAN prievado įrenginiai dalijasi tuo pačiu IP iš WISP per belaidį prievadą. Prijungus prie WISP, belaidis prievadas veikia kaip WAN prievadas.
Bendroji tinklo topologija:
1 žingsnis: Atverkite interneto naršyklę ir eikite į http://cudy.net arba http://192.168.10.1.
Išsamesnės informacijos rasite Kaip prisijungti prie "Cudy Router" žiniatinklio sąsajos?
2 žingsnis: Atsidarys greitosios sąrankos langas, pasirinkite "WISP", tada eikite "Next".
3. žingsnis: Pasirinkite savo "laiko zoną".
4 etapas: Pasirinkite norimą išplėsti kompiuterių tinklą. Spustelėkite "Prijungti".
Bendrieji nustatymai->WISP->Įjungti ir pasirinkite norimą išplėsti kompiuterių tinklą.
5 žingsnis: Įveskite priimančiojo tinklo belaidžio ryšio slaptažodį.
Pastaba: Užtikrinkite, kad įvestas belaidžio ryšio slaptažodis būtų teisingas, kitaip konfigūracija negali būti sėkminga.
6 etapas: Nustatykite belaidžio tinklo pavadinimą ir slaptažodį arba palikite juos numatytuosius.
7 etapas: Paspauskite "Save &; Apply", kad užbaigtumėte konfigūraciją.
8 etapas: Palaukite kelias sekundes, kol sistema bus perkrauta, kai vėl pasirodys prisijungimo puslapis, galėsite naudotis internetu.
120 comments
Both Pavel and I encountered the same issue in WIPS mode, where the device fails to connect to most 5GHz Wi-Fi networks. I saw that support recommended using channels 36–48 (UNII-1). May I ask how to connect to channels 52–64 (UNII-2) and 100–144 (UNII-2 Extended)? Many 5GHz Wi-Fi networks in Hong Kong operate on the 100–144 range. I am using the TR1200 V1 with firmware version 2.4.15 CN.
WR3600H or add OpenWRT or finish the firmware with a working WISP? I got my hands on beta 2.3.11 which has WISP but there are a lot of bugs that are impossible to live with. Give me a real time frame for the release of a working firmware with WISP or WRT so that I can either return your router or wait for a working firmware.
@Dear TH,
TR3000 doesn’t support connecting to the PEAP Wi-Fi network currently. We will feed back this to Cudy R&D team to evaluate if we can support in future.
“I have a Cudy TR3000 router and I am able to use WISP to connect to public WIFI. However, there are some public WIFI providers that require access via PEAP. The WISP interface does not provide a way for the username to be provided these public WIFI providers. Is Cudy TR3000 able to support WISP using PEAP? Is there a plan to roll it out soon in the future if it is not supported now?”
I have a Cudy TR3000 router and I am able to use WISP to connect to public WIFI. However, there are some public WIFI providers that require access via PEAP. The WISP interface does not provide a way for the username to be provided these public WIFI providers. Is Cudy TR3000 able to support WISP using PEAP? Is there a plan to roll it out soon in the future if it is not supported now?
@Dear Pavel,
I think it is related to the 5G WiFi channel. Please set the 5GHz channel of your existing WiFi to one of the 36-48, then check if the problem fixed?
“I have a problem setting up wisp mesh network – Cudy doesn’t see my 5G wifi network, only 2g. therefore the speed is low if I do mesh with WIPS 2g, I can’t find my 5g network, my laptop, phone etc see this network. Cudy – no. Pls help”