Come aggiornare il firmware di Cudy Router?

1. Scarica il firmware più recente dal Centro download.


2. Decomprimi il file scaricato


3. Accendi il dispositivo Cudy, attendi che il LED diventi fisso.


4. Connettiti alla rete di Cudy tramite WiFi o Ethernet.


5. Apri un browser web e vai su http://cudy.net o http://192.168.10.1 .

Per i dettagli, fare riferimento a Come accedere all'interfaccia web di Cudy Router?


6. Aggiorna il firmware.

a. Impostazioni avanzate -> Firmware, scegli il firmware che hai decompresso per caricare.

 

b. La pagina Impostazioni generali->Firmware può eseguire l'aggiornamento online e l'aggiornamento locale.

Nota: è supportato solo il firmware 2.x.x o successivo.


7. Attendere 5 minuti per il riavvio del router.

Torna al blog

97 commenti

@Cher Chadrac,
Merci d’avoir contacté l’équipe d’assistance de Cudy.
La page du portail captif est utilisée par le client pour se connecter à la page web de l’appareil lorsque l’internet est déconnecté.
Si vous souhaitez mettre à jour le micrologiciel de l’appareil, vous pouvez vous connecter à la page web de l’appareil, aller à “Paramètres avancés” — page de fonction “Micrologiciel”.
En outre, vous pouvez essayer d’activer la fonction MAC Repeater si l’internet est déconnecté après l’avoir configuré avec le WiFi principal.

“Vraiment pourquoi cudy a intégré page captif dans son répéteur même !!!
Le répéteur ap 1200 ne fait que demander mot de passe avec page captive à tout le monde…
C’est quoi ces désordres ?
Pire impossible de mettre firmware à jour puffff”

Support

Vraiment pourquoi cudy a intégré page captif dans son répéteur même !!!

Le répéteur ap 1200 ne fait que demander mot de passe avec page captive à tout le monde…

C’est quoi ces désordres ?
Pire impossible de mettre firmware à jour puffff

Chadrac

@Dear Yasir,
I just tested it here in my office. I can’t reproduce this problem. Please try following methods:
1. Reset the router to factory default, then, reinstall it again.
2. Try to change the cable that connect to the WAN port of the router.
3. Try to update back to previous firmware version.
Check if the problem fixed?

“Hi there

Today I purchased a WR1300 router. I could ready 180MB on the 5ghz WiFi .
Afterwards I updated the router to firmware 2.4.4 and I see my WAN port is now max 100MB and I cannot get more than 90MB speeds. Please advise on how to fix this."

Support

Hi there

Today I purchased a WR1300 router. I could ready 180MB on the 5ghz WiFi .
Afterwards I updated the router to firmware 2.4.4 and I see my WAN port is now max 100MB and I cannot get more than 90MB speeds. Please advise on how to fix this.

Yasir

Как сменить серийный номер GPON?

Евгений

Lascia un commento