Hogyan lehet IP-foglalást beállítani egy Cudy routeren?

Az IP-foglalás egy statikus IPv4-cím MAC-címhez való hozzárendelésére szolgál.

 

1. lépés: Nyisson meg egy webböngészőt, és lépjen a következőre:http://cudy.netvagyhttp://192.168.10.1.

Részletekért kérjük, tekintse meg a következőt:Hogyan lehet bejelentkezni a Cudy Router webes felületére?

2. lépésKattintásSpeciális beállítások->IP/MAC-kötésaBiztonságszakasz.



3. lépésKattintásHozzáadásegy bejegyzés hozzáfűzéséhez a listához. Válassza ki az eszközt a MAC-cím listából, és adja meg a hozzárendelni kívánt IP-címet. Írjon be egy megjegyzést ehhez a bejegyzéshez (opcionális).


4. lépés:Mentés és alkalmazása beállítások.
Húzza ki az eszközt, majd csatlakoztassa újra. Ezután ellenőrizheti az eszköz IP-címét, ha az megegyezik a beállított IP-címmel.
Megjegyzés: Ezen bejegyzések IP-címe és MAC-címe is ARP-kötésű.
Vissza a blogba

12 hozzászólás

@Dear Petros,
Our technical support has contacted you via email. Please check.

“Hello and happy new year! I have recently purchased a WR11000 router and 3 BE11000s to be used in a mesh configuration. The BE1s000s use a wired backhaul and all devices run the latest firmware. Devices connected via wire work fine. WiFi however is very problematic and slow. I am not referring to coverage as I checked with my phone next to the BE11000. I only got at most 45Mbps (the wired connection is 1Gbps and with wired devices I get that in full). Some devices cannot even connect via wifi. Anything you can suggest?
Thank you”

Support

Hello and happy new year! I have recently purchased a WR11000 router and 3 BE11000s to be used in a mesh configuration. The BE1s000s use a wired backhaul and all devices run the latest firmware. Devices connected via wire work fine. WiFi however is very problematic and slow. I am not referring to coverage as I checked with my phone next to the BE11000. I only got at most 45Mbps (the wired connection is 1Gbps and with wired devices I get that in full). Some devices cannot even connect via wifi. Anything you can suggest?
Thank you

Petros Macridis

@Dear Moses,
I don’t understand what do want to ask, please tell me more details about your question.
“How devices you bing using IP/MAC Adrress binding. Limitation of devices on network”

Support

How devices you bing using IP/MAC Adrress binding. Limitation of devices on network

Moses Mufukeni

@PJJ Informatika,
Please refer to this article to set it. The router will allocate the IP address you set to the MAC address.

“How do you allocate a specific IP address to a device using its MAC address?
Regard PJJ Informatika”

Support

Hozzászólás írása