Az IP-foglalás egy statikus IPv4-cím MAC-címhez való hozzárendelésére szolgál.
1. lépés: Nyisson meg egy webböngészőt, és lépjen a következőre:http://cudy.netvagyhttp://192.168.10.1.
Részletekért kérjük, tekintse meg a következőt:Hogyan lehet bejelentkezni a Cudy Router webes felületére?
2. lépésKattintásSpeciális beállítások->IP/MAC-kötésaBiztonságszakasz.
3. lépésKattintásHozzáadásegy bejegyzés hozzáfűzéséhez a listához. Válassza ki az eszközt a MAC-cím listából, és adja meg a hozzárendelni kívánt IP-címet. Írjon be egy megjegyzést ehhez a bejegyzéshez (opcionális).
4. lépés:Mentés és alkalmazása beállítások.
Húzza ki az eszközt, majd csatlakoztassa újra. Ezután ellenőrizheti az eszköz IP-címét, ha az megegyezik a beállított IP-címmel.
Megjegyzés: Ezen bejegyzések IP-címe és MAC-címe is ARP-kötésű.
14 hozzászólás
@Dear Ron Rossi,
For now Cudy routers don’t support this. We will provide your feedback to the product department for evaluation.
“I am setting up the Cudy 4G LTE AC1200 router and have a decent list of reserved IP addresses from another router. Most of the devices are not connected at the moment. It is convenient to set this up ahead of time. Can I upload a file with the macs, names, IPs rather than hand enter them all?? Thanks.”
I am setting up the Cudy 4G LTE AC1200 router and have a decent list of reserved IP addresses from another router. Most of the devices are not connected at the moment. It is convenient to set this up ahead of time. Can I upload a file with the macs, names, IPs rather than hand enter them all?? Thanks.
@Dear Petros,
Our technical support has contacted you via email. Please check.
“Hello and happy new year! I have recently purchased a WR11000 router and 3 BE11000s to be used in a mesh configuration. The BE1s000s use a wired backhaul and all devices run the latest firmware. Devices connected via wire work fine. WiFi however is very problematic and slow. I am not referring to coverage as I checked with my phone next to the BE11000. I only got at most 45Mbps (the wired connection is 1Gbps and with wired devices I get that in full). Some devices cannot even connect via wifi. Anything you can suggest?
Thank you”
Hello and happy new year! I have recently purchased a WR11000 router and 3 BE11000s to be used in a mesh configuration. The BE1s000s use a wired backhaul and all devices run the latest firmware. Devices connected via wire work fine. WiFi however is very problematic and slow. I am not referring to coverage as I checked with my phone next to the BE11000. I only got at most 45Mbps (the wired connection is 1Gbps and with wired devices I get that in full). Some devices cannot even connect via wifi. Anything you can suggest?
Thank you
@Dear Moses,
I don’t understand what do want to ask, please tell me more details about your question.
“How devices you bing using IP/MAC Adrress binding. Limitation of devices on network”