הורדת תוכנת OpenWrt

@Dear Dan,
Our technical support has sent you the firmware via email. Please check.

“Hello,
I have a Cudy AP3000 V1.0 access point, currently running firmware 2.4.6-20251023-141351.
I would like to safely upgrade the device to OpenWRT.
Could you please send the official intermediate firmware to my email: my_spy_mail@mail.ru ?
Файл не совместим с моделью устройства.
Загруженный файл: cudy_ap3000wall-v1-sysupgrade_20251119.bin
Размер: 14.25 MB (14945878 B)
MD5: 376d404fd1535cc51168e365e2374427
SN: AP3000_P251600697
Thank you!”

@Dear Mikhail,
The OpenWrt firmware is not developed by Cudy but by the developers. We need the OpenWrt forum official support the router at first, then we can release a middle firmware for you, then you can use and upgrade to the OpenWrt firmware.
For now, there is no OpenWrt firmware for WR3000 2.0. So there is no need to offer the intermediate firmware.

“Can you please upload openwrt for WR3000 v2?”

@Dear Sergey,
The OpenWrt firmware is not developed by Cudy but by the developers. We need the OpenWrt forum official support the router at first, then we can release a middle firmware for you, then you can use and upgrade to the OpenWrt firmware.
For now, there is no OpenWrt firmware for WR1300E 2.0. So there is no need to offer the intermediate firmware. Do you get the OpenWrt firmware for WR1300E 2.0? If yes, please send it to us for checking.

“Hello.
I can’t find the intermediate firmware for upgrading to OpenWRT for the WR1300E v2.0.
Please help.”

@Dear Luis.
1. You can try to connect the computer to the LAN port of the router. Then set the IP address on your computer to 192.168.1.x 255.255.255.0. Then try to login to the web page of the router via http://192.168.1.1.
2. If still fail, please try to recover the router to Cudy official firmware first. Then update it again. You can refer to this FAQ.
https://www.cudy.com/blogs/faq/how-to-recovery-the-cudy-router-from-openwrt-firmware-to-cudy-official-firmware?pos=1&_sid=ffa4ef249&ss=r

“Hello
The Cudy M3000 openwrt is connected to another router via the WAN port and configured as a dumb access point (wan/wan6 removed, ports added to br-lan, Firewall and DHCP disabled on LAN), but it does not work.
When a PC is connected to a LAN port on the Cudy M3000, it does not receive an IP address. If an IP address is set manually, there is still no internet access.
Please advise what additional configuration is required for the Cudy M3000 to operate correctly as a dumb AP when connected via the WAN port.”

@Dear wiltron,
Sorry, we don’t offer the support for OpenWrt System.

“Hello
The Cudy M3000 openwrt is connected to another router via the WAN port and configured as a dumb access point (wan/wan6 removed, ports added to br-lan, Firewall and DHCP disabled on LAN), but it does not work.
When a PC is connected to a LAN port on the Cudy M3000, it does not receive an IP address. If an IP address is set manually, there is still no internet access.
Please advise what additional configuration is required for the Cudy M3000 to operate correctly as a dumb AP when connected via the WAN port.”