הורדת תוכנת OpenWrt

@Dear Yaroslav,
Our technical support has sent you the firmware via email. Please check.

“@Dear support, I have a Cudy TR3000. Stock firmware 2.5.27-20260804-183625, SN: TR3000254500619. Please send me the correct Cudy-signed intermediate firmware”

@Dear support, I have a Cudy TR3000. Stock firmware 2.5.27-20260804-183625, SN: TR3000254500619. Please send me the correct Cudy-signed intermediate firmware

@Dear Vitaliy,
Our technical support has sent you the firmware via email. Please check.

“Hello.

I have a Cudy TR3000-256MB (hardware TR3000 256MB FLASH V1.0, label revision EAEU1.0), SN: S0001302262309298, stock firmware 2.5.27-20260804-190139.

I would like to install OpenWrt. Based on the serial number, I believe this unit has the new F50L1G41LC flash. Please send me:
(1) the correct Cudy-signed intermediate firmware for this exact unit, and confirm it supports the new flash;
(2) the official stock firmware for TR3000 256MB (R103) and instructions to restore it from OpenWrt;
(3) written confirmation of the warranty terms after installing OpenWrt.

Thank you."

Hello.

I have a Cudy TR3000-256MB (hardware TR3000 256MB FLASH V1.0, label revision EAEU1.0), SN: S0001302262309298, stock firmware 2.5.27-20260804-190139.

I would like to install OpenWrt. Based on the serial number, I believe this unit has the new F50L1G41LC flash. Please send me:
(1) the correct Cudy-signed intermediate firmware for this exact unit, and confirm it supports the new flash;
(2) the official stock firmware for TR3000 256MB (R103) and instructions to restore it from OpenWrt;
(3) written confirmation of the warranty terms after installing OpenWrt.

Thank you.

@Dear Arham,
There is no OpenWrt firmware for RE1200 currently. We need the OpenWrt forum official support the router at first, then we can release a middle firmware for you, then you can use and upgrade to the OpenWrt firmware.

“Subject: Request: OpenWrt intermediate firmware for RE1200 V1.0 (same as RE1200 Outdoor)

Hello,

I’d like to install OpenWrt on my Cudy RE1200 V1.0 (current firmware: RE1200-R14-2.4.20-20250908-170954).

I understand that for the RE1200 Outdoor, Cudy provides a signed “intermediate firmware” that removes the bootloader’s firmware signature/image-name check, after which standard OpenWrt builds can be installed. Could you provide the equivalent intermediate firmware for the RE1200 V1.0 (board/image name “R14”)?

I previously contacted support about this and was told no OpenWrt firmware exists yet for the RE1200 V1.0, so no intermediate firmware is offered. Since the RE1200 V1.0 uses the same MT7628-based hardware and the same U-Boot signature-check mechanism as the RE1200 Outdoor (just a different board/image name, “R14” vs “R56”), I wanted to ask directly whether an R14-specific intermediate firmware could be built, the same way it was for the Outdoor.

If it would help, I’m happy to provide my current firmware version, board revision, or any other details needed.

Thank you for your time.

Arham"