איך לבנות רשת רשת ביתית שלמה עם מוצר של Cudy?

מערכת Cudy Whole Home Mesh בנויה כדי לבטל אזורים מתים ולספק Wi-Fi ללא הפרעות ברחבי הבית. מאמר זה ידריך אתכם לבנות מערכת רשת שלב אחר שלב.

הֲכָנָה:
1. ודאו שאתם הבעלים של לפחות 2 מוצרי Cudy.

2. כל מוצרי Cudy תומכים בטכנולוגיית רשת: אתר האינטרנט הרשמי של Cudy Home Mesh

3. הקושחה מעודכנת:מרכז ההורדות

4. קח אותם לאותו חדר במהלך התצורה.

5. אפס את כל מוצרי Cudy שלך להגדרות ברירת המחדל של היצרן. (כאשר המוצר דולק, לחץ והחזק את כפתור האיפוס עם סיכה למשך 6 שניות, ולאחר מכן שחרר.)

6. הגדר את הנתב הראשי שלך והתחבר אליו לאינטרנט.

כאן ניקח את M1800 ו-WR2100 כדוגמאות:

שלב 1פתח דפדפן אינטרנט ועבור אלhttp://cudy.netאוֹhttp://192.168.10.1.

לפרטים, אנא עיינו באיך להתחבר לממשק האינטרנט של הנתב Cudy?

שלב 2בדף סטטוס המערכת, לחץ על כפתור "+".

שלב 3לחץ על כפתור ה-WPS ב-M1800 ולאחר מכן לחץ על כפתור ה-WPS ב-WR2100.

יחידת רשת ראשית: לבן נצנץ

יחידת רשת נוספת: מהבהבת בלבן ואדום לסירוגין

שלב 4:זה ילך ל"סריקה", ואז"מְקַשֵׁר".

שלב 5המתן עד שנורית המערכת של הנתב הנוסף תדליק את עצמה בכחול קבוע, ולאחר מכן העבר את WR2100 למקומו.

שלב 6בהצלחה ותהנו מרשת הרשת.

פֶּתֶק:

1. ניתן להגדיר נתב 4/5G רק כיחידת רשת ראשית. לדוגמה:

2. לא תוכלו להתחבר לממשק האינטרנט של נתב הרשת הנוסף. אם תרצו לשנות הגדרות, אנא לחצו על "סטטוס המערכת"->"רֶשֶׁת".

Back to blog

83 comments

Good morning. I need the updated firmware for the WR6500 router as the main mesh router and three M3000 units as mesh satellites. Can you send it to me by email?
Thank you.

ANTONIO MARTINEZ

@Dear Matej,
I suggest you use the WR3000P currently since WR6500H’s official firmware still doesn’t support Mesh function.
It is better to connect all the mesh devices via cable. More stable and faster.

“Hi,

Thank you for your prompt reply.

I am deciding between the WR3000P and WR6500H as the main unit/router in my mesh system, along with the AP3000 Outdoor and AP3000 as APs. Will the entire system work on Wi-Fi 6 or within the range of the WR6500H Wi-Fi 7, and outside its range, Wi-Fi 6? Is it better to connect the APs to the main router with cables or wirelessly?

What do you recommend? And since the APs will be powered over PoE, what PoE switch do you recommend for this setting?
Thank you."

Support

Hi,

Thank you for your prompt reply.

I am deciding between the WR3000P and WR6500H as the main unit/router in my mesh system, along with the AP3000 Outdoor and AP3000 as APs. Will the entire system work on Wi-Fi 6 or within the range of the WR6500H Wi-Fi 7, and outside its range, Wi-Fi 6? Is it better to connect the APs to the main router with cables or wirelessly?

What do you recommend? And since the APs will be powered over PoE, what PoE switch do you recommend for this setting?

Thank you.

Matt

“@Dear Matt,

For now, yes, but you need to update the firmware to the new firmware which we can send it to you. Please check the model of your BE6500 router first. Is it WR6500H or WR6500?

Hi,
Can a Wi-Fi 7 Router (BE6500) be connected to a Wi-Fi 6 AP (Outdoor AX3000)?
Thanks.
Matt”

Matej

@Dear Matt,

For now, yes, but you need to update the firmware to the new firmware which we can send it to you. Please check the model of your BE6500 router first. Is it WR6500H or WR6500?

“Hi,
Can a Wi-Fi 7 Router (BE6500) be connected to a Wi-Fi 6 AP (Outdoor AX3000)?
Thanks.
Matt”

Support

Hi,

Can a Wi-Fi 7 Router (BE6500) be connected to a Wi-Fi 6 AP (Outdoor AX3000)?

Thanks.

Matt

Matej

Leave a comment