1. Téléchargez le dernier firmware depuisCentre de téléchargement.
2. Décompressez le fichier que vous téléchargez
3. Allumez l'appareil Cudy, attendez que le voyant LED devienne fixe.
4. Connectez-vous au réseau de Cudy via WiFi ou Ethernet.
5. Ouvrez un navigateur Web et accédez àhttp://cudy.netouhttp://192.168.10.1.
Pour plus de détails, veuillez vous référer àComment se connecter à l'interface Web de Cudy Router ?
6. Mettez à niveau le micrologiciel.
un.Paramètres avancés -> MicrologicielChoisissez le firmware que vous avez décompressé pour le télécharger.
b.Paramètres généraux->Micrologiciella page peut effectuer une mise à niveau en ligne et une mise à jour locale.
Note: Seul le firmware 2.x.x ou supérieur est pris en charge.
7. Attendez 5 minutes pour que le routeur redémarre.
173 commentaires
Hi, is possible the last firmware for LT400 EU V1.0 version?.
Tnx!
@Dear STEVE,
Thank you for you feedback. We will follow it.
“Hi Cudy Team,
This is a follow-up to my previous report on system-wide reboots on the Cudy P5 (R21) at 802.11ax channel widths of 80 MHz and 160 MHz.
After analyzing the syslog I identified two additional root causes:
1. fw_version: 0×250902ab → WLAN.HK.2.5.0.9, built 2021-06-18 — nearly 5 years old
2. board_id: 0xff → P5-specific BDF not loaded, using generic calibration profile
Both issues have been reported to Cudy support. Stable only at 40 MHz channel width until firmware is updated.""
Hi Cudy Team,
This is a follow-up to my previous report on system-wide reboots on the Cudy P5 (R21) at 802.11ax channel widths of 80 MHz and 160 MHz.
After analyzing the syslog I identified two additional root causes:
1. fw_version: 0×250902ab → WLAN.HK.2.5.0.9, built 2021-06-18 — nearly 5 years old
2. board_id: 0xff → P5-specific BDF not loaded, using generic calibration profile
Both issues have been reported to Cudy support. Stable only at 40 MHz channel width until firmware is updated."
@Dear Dante Salvetti,
Our technical support has sent you the latest firmware via email. Please check.
“Good morning. I have an LT400 EU V1.0 router, firmware version 1.7.4-20210303-112556.
I can’t update the firmware to a later version, either via Wi-Fi or LAN. What can I do? I might need a compatible firmware. Could you send it to me? Thank you. Dante Salvetti”
Good morning. I have an LT400 EU V1.0 router, firmware version 1.7.4-20210303-112556.
I can’t update the firmware to a later version, either via Wi-Fi or LAN. What can I do? I might need a compatible firmware. Could you send it to me? Thank you. Dante Salvetti