1. Téléchargez et décompressez le fichier depuisici.
2. Téléchargez le dernier firmware depuis lesite officielet renommez-le en « recovery.bin ».Remarque : vous devez le placer dans le même fichier que les outils Tftpd.
3. Éteignez votre routeur. Débranchez l'adaptateur secteur ou appuyez sur le bouton d'alimentation.
4. Connectez votre ordinateur au port LAN du routeur avec un câble Ethernet.
5. Configurez manuellement l'adresse IP de votre ordinateur sur « 192.168.1.88 ».
6. Exécutez 'tftp32.exe'.
7. Exécutez 'netsh advfirewall désactive l'état de tous les profils' dans la ligne de commande pour désactiver le pare-feu Windows, sinon TFTP sera bloqué. Vous pouvez également désactiver le pare-feu dans le Panneau de configuration de votre ordinateur, comme illustré ci-dessous.
8. Appuyez sur la touche 'Réinitialiser' et maintenez-le enfoncé. Avant que le routeur ne soit allumé et avant que tftp ne commence à télécharger le firmware, ne relâchez pas le bouton 'Réinitialiser' bouton/trou.
9. Allumez le routeur.
10. Lorsque les voyants clignotent tous rapidement ou lorsque tftp commence à télécharger le firmware, vous pouvez relâcher le bouton «Réinitialiser' bouton/trou.
11. Lorsque le voyant clignote lentement, la mise à niveau est terminée.
12. Veuillez récupérer l'adresse IP de votre ordinateur pour qu'elle soit une IP dynamique.
13. Terminé.
260 commentaires
@Dear Archi,
Our technical support has sent you the firmware via email. Please check.
“TR3000 256MB V1.0 — bricked after flashing intermediate firmware
Hello Cudy Support,
I have a Cudy TR3000 256MB Flash V1.0 router.
Serial number: s0001825262604247
What happened:
I updated the router to the official firmware m_upgrade_TR3000_256MB_Flash-R103-2.5.21-20260708.
After that, I downloaded the intermediate firmware DTS_and_intermediate_firmware_b766f42b-5e1c-4ad5-85b2-53990a85a956 from the TR3000-256MB 1.0 download page.
I flashed this intermediate firmware through the web interface.
After the flash, the router does not boot. It is bricked.
What I need:
The correct TFTP recovery file (recovery.bin) for my specific device.
Step-by-step TFTP recovery instructions for TR3000 256MB V1.0.
Confirmation of which flash chip is installed in my unit (F50L1G41LB or F50L1G41LC).
The correct intermediate firmware for my device revision to install OpenWrt, if my unit has the new flash chip.
Please help me recover the router.
Thank you."
@Dear Ricci,
If you have changed the uboot of the router. This recovery method will not work. You must change back the default Cudy uboot first to recover the firmware.
“Hello again, I have already written a comment here in search of a solution to my problem. I have a cudy tr30 router model, I installed the openwrt firmware on it according to the YouTube guide and after the power was turned off, the firmware stopped loading, I tried everything except using UART, today I’ll probably try to figure it out with chat gpt, but if you have another easier way to get the cudy tr30 firmware back, then I I would be very grateful.”
WR3600H version 1.0 — blocked after flashing the intermediate firmware
Hello, Cudy support service,
I have a Cudy WR3600H version 1.0
Serial number: WR3600H244300255
What happened:
I updated the router to the official firmware 2.5.30 via tftpd64
Please help me restore the router.
Thank you.
TR3000 256MB V1.0 — bricked after flashing intermediate firmware
Hello Cudy Support,
I have a Cudy TR3000 256MB Flash V1.0 router.
Serial number: s0001825262604247
What happened:
I updated the router to the official firmware m_upgrade_TR3000_256MB_Flash-R103-2.5.21-20260708.
After that, I downloaded the intermediate firmware DTS_and_intermediate_firmware_b766f42b-5e1c-4ad5-85b2-53990a85a956 from the TR3000-256MB 1.0 download page.
I flashed this intermediate firmware through the web interface.
After the flash, the router does not boot. It is bricked.
What I need:
The correct TFTP recovery file (recovery.bin) for my specific device.
Step-by-step TFTP recovery instructions for TR3000 256MB V1.0.
Confirmation of which flash chip is installed in my unit (F50L1G41LB or F50L1G41LC).
The correct intermediate firmware for my device revision to install OpenWrt, if my unit has the new flash chip.
Please help me recover the router.
Thank you.
Hello again, I have already written a comment here in search of a solution to my problem. I have a cudy tr30 router model, I installed the openwrt firmware on it according to the YouTube guide and after the power was turned off, the firmware stopped loading, I tried everything except using UART, today I’ll probably try to figure it out with chat gpt, but if you have another easier way to get the cudy tr30 firmware back, then I I would be very grateful.