Aus verschiedenen Gründen ist es manchmal notwendig, die Firmware von Geräten in unserem Cudy Mesh-System auf eine ältere Version zurückzusetzen. Dies ist jedoch weder unter „Allgemeine Einstellungen“ – „Firmware“ noch unter „Erweiterte Einstellungen“ – „Firmware“ möglich. Wie gehen wir also vor? Im Folgenden wird der M3000 als Beispiel verwendet.
1. Bitte gehen Sie zu „Systemstatus“ und klicken Sie auf der Mesh-Karte auf „Weitere Details“. Wie unten dargestellt.
2. Überprüfen Sie die Mesh-Liste. Sie können die Firmware der Mesh-Geräte nacheinander aktualisieren. Wir empfehlen, zuerst die Satelliten-Mesh-Router zu aktualisieren. Klicken Sie auf das Mesh-Gerät und wählen Sie „Betrieb“ – „Firmware“.
3. Laden Sie die Firmware hoch, dann wird das Gerät aktualisiert. Nach erfolgreicher Aktualisierung können Sie das nächste Mesh-Gerät aktualisieren.
8 commentaires
@Dear Jean,
Our technical support has sent you the firmware via email. Please check.
“Good Day
Please can you advise me the same. Version 2.3.12 is by miles the most stable but still terrible. Version 2.3.15 and 2.3.16 is almost unusable as it connects and disconnects devices as it wants with no logic used. I would like to use 2.2.10. When will csp 2.5 be released on wr3600 v1.0 and will it be stable ??”
Good Day
Please can you advise me the same. Version 2.3.12 is by miles the most stable but still terrible. Version 2.3.15 and 2.3.16 is almost unusable as it connects and disconnects devices as it wants with no logic used. I would like to use 2.2.10. When will csp 2.5 be released on wr3600 v1.0 and will it be stable ??
@Dear Pty,
You can try to downgrade the firmware according to the instruction on the website below.
https://www.cudy.com/blogs/faq/how-to-recovery-the-cudy-router-from-openwrt-firmware-to-cudy-official-firmware?pos=1&_sid=64117e092&ss=r
2. Our technical support will contact you via email. Please check.
“Hi,
I’m trying to downgrade my wr3600 1.0 from v.2.3.12 to v.2.2.10 but I get file invalid.I tried your method from the mesh section but it still won’t work.
1. Is there a way to do it for this specific router?
2. Are you planning to roll out a new fw that will fix the current issues of 2.3.16?
I currently experience TEAMS intreruptions during calls and Im getting a bit frustrated with this router”
Hi,
I’m trying to downgrade my wr3600 1.0 from v.2.3.12 to v.2.2.10 but I get file invalid.I tried your method from the mesh section but it still won’t work.
1. Is there a way to do it for this specific router?
2. Are you planning to roll out a new fw that will fix the current issues of 2.3.16?
I currently experience TEAMS intreruptions during calls and Im getting a bit frustrated with this router
@Caro Carlo,
Penso di sì. È possibile farlo. Ti prego di fornirmi maggiori informazioni.
1. Come pensi di collegare tutti i Cudy BE6500? Tramite cavo o in modalità wireless? C’è uno switch tra di loro?
2. Come pensi di collegare il tuo router Cudy al router Wind? Tramite cavo?
“Buongiorno, devo installare n 5 BE6500 2.5G collegati ad un router di Wind è possibile fare una sola rete wifi Mesh ???
Attendo vostro riscontro.
Grazie”