Amazon A+ Content
Skip to product information
1 of 1

BE3600 Wall Plate Wi-Fi 7 Access Point

BE3600 Wall Plate Wi-Fi 7 Access Point, AP3600 Wall 1.0

AP3600 Wall 1.0

An in-wall Wi-Fi 7 AP featuring two 2.5GbE Ports and three GbE ports, designed for per-room wireless coverage across a wide range of deployments, including dormitories, apartments, hotels, villas, and offices. 


  • 2.0 GHz Quad-Core CPU
  • Kahe sagedusalaga Wi-Fi 7
  • 2882 Mbit/s + 688 Mbit/s Wi-Fi 1
  • 2× 2.5GbE, 3× GbE
  • 802.3at/af
  • Multi-AP Management 2
  • Captive Portal, Multi-SSID
  • Katab 60 m² (650 ft²) 3
  • 60 ühendatud seadet 4

Compatible products:

C200P, C500P
View full details
Mudeli versioon
Mudeli versioon AP3600 Wall 1.0
CPU
CPU CPU Details 2.0 GHz Quad-Core
Memory/Storage
Memory/Storage Flash/ROM 128 MB (1 Gbit) NAND
DDR/RAM 512 MB (4 Gbit) DDR3
Wireless
Wireless MLO Speeds 3570 Mbps
5 GHz Wi-Fi Speed 2882 Mbps
2.4 GHz Wi-Fi Speed 688 Mbps
5 GHz Wi-Fi Streams 3 Spatial Streams
2.4 GHz Wi-Fi Streams 2 Spatial Streams
Wi-Fi Antennas 5× Internal
FEM or PA/LNA 5 GHz: 3× Internal, 2.4 GHz: 2× Internal
Beamforming
Range Performance Max: 180 m (591 ft)
Tested in open-space environments with minimal interference. Actual WiFi range may vary depending on layout and wall materials. Refer to the Wall Performance specifications for placement suggestions.
Wall Performance Two wooden walls with thickness < 10 cm (4'')
One concrete wall with thickness < 20 cm (7'') or two concrete walls with thickness < 10 cm (4'')
Interfaces
Interfaces 2.5G RJ45 Ports 2
Gigabit RJ45 Ports 3
Ethernet Notes ETH0: PoE In, LAN1: PoE OUT* (*See Power Section)
Buttons and LEDs
Buttons and LEDs LED System
Physical Buttons Reset Button, LED On/Off Button (Configurable to control LED and Wi-Fi)
Power
Power Power Input Type PoE via Ethernet Port
Power Methods
  • 802.3at/af PoE
  • Passive PoE
Power Input
  • PoE on ETH0: 802.3at/af
  • Passive PoE on ETH0: 48V⎓
Power Output PoE on LAN1: PoE Passthrough (the output voltage equals the input voltage range 42.5–57V)
Max Power Consumption (W) 12W (48V PoE)
Idle Power Consumption (W) 5W (48V PoE)
Max Power Output (W) 13.5W
Note The PoE output requires a 802.3at or higher PoE input and must be enabled on the configuration page.
Reliability
Reliability Advanced Hardware Watchdog
EMC ESD: Contact: 4kV; Air: 8kV
Environment Operating Temperature: 0 ℃ ~ 40 ℃ (14 ℉ ~149 ℉)
Storage Temperature: -40 ℃ ~ 70 ℃ (-40 ℉ ~ 158 ℉)
Operating Humidity: 10% ~ 90% non-condensing
Storage Humidity: 5% ~ 90% non-condensing
Certifications
Certifications FCC, CE
Mechanical
Mechanical Installation Wall-mount
Dimension 143×86×27.6 mm
5.63×3.39×1.09 inches
Package Content
Package Content
  • AP3600 Wall
  • Mounting Kit
  • Installation Guide
Ordering Information
Ordering Information Retail Package Dimension 152×39.5×90 mm
5.98×1.56×3.54 inches
Units per Carton 30
Carton Dimension 32.8×22×29.6 cm
12.91×8.66×11.65 inches
Compatibility
Compatibility Compatible Products C200P 1.0, C500P 1.0
Compatible Accessories POE200 2.0, POE300 2.0, POE400 2.0, POE350 2.0, POE200H 1.0, POE400X 2.0, POE350 3.0, POE400 3.0, POE300 3.0

  1. Tegelik traadita andmeside läbilaskevõime sõltub võrgu tingimustest, kliendi piirangutest ja keskkonnateguritest, sealhulgas hoone paigutusest, takistustest ja kliendi asukohast.
  2. Cudy AP Controller is required to enable this feature.
  3. Traadita side leviala nõue on ainult viide. Leviala toimivus sõltub keskkonnateguritest, sealhulgas hoonete paigutusest, takistustest, liiklusmahust ja -tihedusest ning seadme asukohast. Optimaalse leviala tagamiseks paigutage seade Wi-Fi-d nõudva piirkonna keskele.
  4. Tegelikku jõudlust mitme seadme puhul võivad mõjutada kasutatavate rakenduste tüübid, kogu olemasolev ribalaius ja teie seadmete võimekus. Vanemate Wi-Fi-seadmete (vanad standardid) ühendamine võib vähendada üldist tõhusust. Tõhususe funktsioonide kasutamine eeldab ühilduvaid kliendiseadmeid, mis samuti neid funktsioone toetavad. Lisateavet toetatud tõhususe funktsioonide kohta leiate Spetsifikaatide tabelis tarkvara osas.