Kasutada saab ainult Cudy rutereid, mis on uuendatud Cudy APP haldamist toetavale püsivara versioonile.
Andme APP abil saab hallata ainult Cudy rutereid.Sellepärast on väga tõenäoline, et teie Cudy ruuter ei ole uuendatud püsivara versioonile, mis toetab APP-i haldamist.
Cudy APPi saate alla laadida, skaneerides allolevat QR-koodi.
Palun laadige uuendusena alla uusim püsivara versioon.
Mudel: Cudy traadita tooted annavad järk-järgult välja uue püsivara, mis toetab APP-haldust. Järgnevas tabelis on loetletud mõned tootemudelid, mis juba toetavad APP-i. Teised mudelid võivad olla juba välja antud. Uue püsivara kontrollimiseks minge allalaadimiskeskusesse.
| WR1300 V2 & V3 |
| M3000 |
| M1300 |
| M1200 |
| WR3000 |
| WR1200 |
| WR1500 |
| M1800 |
| X6 |
| WR1300E V2 |
| LT700E |
| LT15E |
Märkus: Kõigi Cudy ruuterite püsivara versioon 2.x.x toetab Cudy APP haldamist.
Palun vajutage homme, et anda tagasisidet, kui teil on küsimusi või nõuandeid Cudy APP kasutamisel.
41 comments
No puedo administrar mi router cudy AX1500 con la aplicación Cudy y intento actualizar el firmware 2025 y no lo admite dice formato de archivo inválido
@Dear Bartek,
Thank you for contacting Cudy support team.
If you want to use like this, please set it to the Access Point mode. Please follow the steps:
1. Disconnect the cable from your ISP router, connect the WAN port of WR3600 to your ISP router.
2. Disconnect and reconnect the phone to the router. Then you will be able to login in to the WEB page or see it in Cudy APP. Please set it to the Wireless Access Point mode. Then the router will disable NAT function. And you can also manage it via the APP or cudy.net.
“i dont see my brand new cudy wr3600 in app, nor in cudy.net, or even in 192.168.10.1,wifi and lan internet works, but i would like to acces config, i have connected it lan1-lan1 to my isp router/modem combo, and lan2 of cudy to my pc. i did it that way to not create double NAT, is it a problem? i would like it to stay in that config and still have access to admin panel”
i dont see my brand new cudy wr3600 in app, nor in cudy.net, or even in 192.168.10.1
wifi and lan internet works, but i would like to acces config, i have connected it lan1-lan1 to my isp router/modem combo, and lan2 of cudy to my pc. i did it that way to not create double NAT, is it a problem? i would like it to stay in that config and still have access to admin panel
@Wasem,
Dear Customer,
Thank you for contacting Cudy support team.
Our technical support has sent you the solutions via email. Please check.
“WR 1500 isn’t working on app even though it’s mentioned in your website and bought 2 router accordingly.
The second thing I don’t know how to connect 2 wr 1500 as easy mesh to have same ssid
I don’t know how to configure easy mesh”
WR 1500 isn’t working on app even though it’s mentioned in your website and bought 2 router accordingly.
The second thing I don’t know how to connect 2 wr 1500 as easy mesh to have same ssid
I don’t know how to configure easy mesh