Hoiatused
See veebileht loetleb OpenWrt süsteemi toetavate seadmete tarkvara, enne tarkvara allalaadimist ja paigaldamist palume arvestada, et OpenWrt Project on Linuxi operatsioonisüsteem, mis on suunatud manussüsteemidele. Selle asemel, et püüda luua üksikut staatilist püsivara, pakub OpenWrt täielikult kirjutatavat failisüsteemi koos paketihaldusega. See vabastab teid müüja poolt pakutavate rakenduste valikust ja konfiguratsioonist ning võimaldab teil kohandada seadet pakettide abil mis tahes rakendusele sobivaks. Arendajate jaoks on OpenWrt raamistik, mille abil saab luua rakenduse, ilma et oleks vaja ehitada selle ümber täielikku püsivara; kasutajate jaoks tähendab see võimalust täielikuks kohandamiseks, et kasutada seadet viisil, mida nad pole kunagi ette kujutanud.
Kirjeldus
- Seda faili saab kasutada ainult siis, kui teie ruuter töötab Cudy veebi kasutajaliidese all.
- Kui ruuter juba töötab OpenWRT UI all, peaks kasutaja esmalt taastama selle Cudy ametliku firmware'ile. Ja seejärel uuendada ruuterit selle püsivara abil.
- Kuidas taastada ruuter Cudy ametlikule püsivara? Palun lugege alla laaditud faili readme.
Garantii:
Cudy deklareerib käesolevaga
- Me, Cudy, ei võta garantiid ühegi tarkvara eest, mida ei ole välja andnud Shenzhen Cudy Technology Co., Ltd. .
- Me ei võta garantiid toodete eest, millele on paigaldatud tarkvara, mida ei ole välja andnud Shenzhen Cudy Technology Co., Ltd. .
- Kui teil on vaja kasutada openwrt tarkvara, soovitame selle alla laadida Cudy ametlikust veebisaidist.
Laadige alla OpenWrt püsivara, et eemaldada allkirja kontroll: Ajama
OpenWrt Firmware Finder (ei ole Cudy poolt välja antud): OpenWrt Firmware Selector
1319 comments
Hi and thanks for the reply, however, as previously stated, I’m on firmware version v2.3.8. Should I downgrade to v2.0.0?
Thanks once again
@Jens,
Please try to update the 2.0.0 first, you can download it on the website below.
https://www.cudy.com/pages/download-center/m3000-1-0
The try again.
“Hi,
I bought a 2pc M3000 1.0 kit and I’m trying to flash the devices with OpenWRT.
While initiating the process (Advanced Settings > System > Firmware) with cudy_m3000-v1-sysupgrade.bin, I get the error “Not applicable! Please upload the firmware applicable to the following models.”
I’m on v2.3.8. Please advise.
Thank you.”
Thank you, Cudy and your hard working people, for offering these migration images and compatibility with OpenWRT. I am delighted with my new WR3000S.
Hi,
I bought a 2pc M3000 1.0 kit and I’m trying to flash the devices with OpenWRT.
While initiating the process (Advanced Settings > System > Firmware) with cudy_m3000-v1-sysupgrade.bin, I get the error “Not applicable! Please upload the firmware applicable to the following models.”
I’m on v2.3.8. Please advise.
Thank you.
@Steve
Hi Steve,
OK. I have uploaded it to the Google Drive.
“Dear Cudy team,
thanks for providing the migration image for the M1200. It works as expected.
Can you please upload it to the Google drive?
Remarks if someone uses it:
- The image can be flashed from the OEM web interface while the device is connected to the LAN port (lower port)
- After flashing the migration image, connect the LAN cable to the WAN port (upper port)
- OpenWrt is now accessible via http://192.168.1.1
- A official OpenWrt image can be flashed now
- After flashing the official OpenWrt image, connect the LAN cable to the LAN port (lower port)
- OpenWrt is now accessible via http://192.168.1.1
Best Regards
Steve"