OpenWrt tarkvara allalaadimine

Hoiatused

See veebileht loetleb OpenWrt süsteemi toetavate seadmete tarkvara, enne tarkvara allalaadimist ja paigaldamist palume arvestada, et OpenWrt Project on Linuxi operatsioonisüsteem, mis on suunatud manussüsteemidele. Selle asemel, et püüda luua üksikut staatilist püsivara, pakub OpenWrt täielikult kirjutatavat failisüsteemi koos paketihaldusega. See vabastab teid müüja poolt pakutavate rakenduste valikust ja konfiguratsioonist ning võimaldab teil kohandada seadet pakettide abil mis tahes rakendusele sobivaks. Arendajate jaoks on OpenWrt raamistik, mille abil saab luua rakenduse, ilma et oleks vaja ehitada selle ümber täielikku püsivara; kasutajate jaoks tähendab see võimalust täielikuks kohandamiseks, et kasutada seadet viisil, mida nad pole kunagi ette kujutanud.

Kirjeldus

  1. Seda faili saab kasutada ainult siis, kui teie ruuter töötab Cudy veebi kasutajaliidese all.
  2. Kui ruuter juba töötab OpenWRT UI all, peaks kasutaja esmalt taastama selle Cudy ametliku firmware'ile. Ja seejärel uuendada ruuterit selle püsivara abil.
  3. Kuidas taastada ruuter Cudy ametlikule püsivara? Palun lugege alla laaditud faili readme.

Garantii:

Cudy deklareerib käesolevaga

  1. Me, Cudy, ei võta garantiid ühegi tarkvara eest, mida ei ole välja andnud Shenzhen Cudy Technology Co., Ltd.
  2. .
  3. Me ei võta garantiid toodete eest, millele on paigaldatud tarkvara, mida ei ole välja andnud Shenzhen Cudy Technology Co., Ltd.
  4. .
  5. Kui teil on vaja kasutada openwrt tarkvara, soovitame selle alla laadida Cudy ametlikust veebisaidist.

Laadige alla OpenWrt püsivara, et eemaldada allkirja kontroll: Ajama

OpenWrt Firmware Finder (ei ole Cudy poolt välja antud): OpenWrt Firmware Selector

Back to blog

1466 comments

Hi, I have a Cudy WR3000 EU 1.0 router with serial number starting with 2451 running firmware 2.2.6 US. I would like to install OpenWRT. Can you provide me the intermediate firmware for my device?

By the way, is there any reason not to have it available in the Google Drive folder along with the other models?

Henrique

@Dear Christian Boettger,
For now, no, we can’t do this job currently.

“Hello,

is there any chance that Cudy will release an OpenWRT firmware for the WR3000 v2.0 (there is one für 1.0, but nor 2.0)?

Regards"

support

Hello,

is there any chance that Cudy will release an OpenWRT firmware for the WR3000 v2.0 (there is one für 1.0, but nor 2.0)?

Regards

Christian Boettger

Dear Sergey,
I am not sure about this. Please have a try.

“Hello. I have a WR3000S v.1 router (S/N S0007084261201121). I initially installed the transitional firmware `cudy_wr3000s-v1-sysupgrade_20251119.bin` from your website. Currently, I have `openwrt-25.12.5-mediatek-filogic-cudy_wr3000s-v1-squashfs-sysupgrade.bin` installed, with 44 MB of available flash memory. Can I switch to the `openwrt-25.12.5-mediatek-filogic-cudy_wr3000s-v1-ubootmod-squashfs-sysupgrade.itb` firmware to get 90+ MB of memory without risking damage to the router?
Thanks in advance.”

support

@Dear bulat,
Our technical support has sent you the firmware via email. Please check.

“Hello Cudy Support,

I have a Cudy WR3000H V1.0.

Serial number: S001004261804085 EU1.0
Current stock firmware: 2.4.5-20250515-105059

I would like to install official OpenWrt. Please send me the latest Cudy-signed OpenWrt intermediate firmware compatible with my WR3000H V1.0.

Thank you!"

support

Leave a comment