1. Laadige uusim püsivara alla Download Center.
2. Laadige alla laaditud fail lahti
3. Lülitage Cudy seade sisse, oodake, kuni LED muutub heledaks.
4. Ühendage Cudy võrku WiFi või Etherneti kaudu.
5. Avage veebilehitseja ja minge aadressile http://cudy.net või http://192.168.10.1.
Detailide saamiseks vaadake Kuidas Cudy Routeri veebiliidesesse sisse logida?
6. Uuendage püsivara.
a. Suurendatud seaded -> Firmware, valige üleslaadimiseks lahti pakitud firmware.
b. Üldised seaded->Firmware lehel saab teha veebipõhist uuendamist ja kohalikku uuendamist.
Märkus: Ainult Firmware 2.x.x või uuemate versioonide tugi.
7. Oodake 5 minutit ruuteri taaskäivitamiseks.
181 comments
@Estimado Snheider:
Intente cambiar el navegador web para actualizar el router. Le sugiero que utilice Chrome o Edge.
Si sigue sin funcionar, pruebe con otro ordenador.
“Ya e intentado 2 veces actualizar mi router ax1500, una vez que hago todo los paso, se cae la conexión a internet hasta que lo apagó, cuando lo enciendo todo normal pero en la misma versión que estaba”
Firmware EU 1.0 (Official .bin)
Ya e intentado 2 veces actualizar mi router ax1500, una vez que hago todo los paso, se cae la conexión a internet hasta que lo apagó, cuando lo enciendo todo normal pero en la misma versión que estaba
@Dear Sakis,
Please try to change the web browser to update the router. I suggest the chrome or edge.
If still fail, please try to change a computer.
“It is impossible to update the Cudy WR1500 that I bought.
I follow the instructions exactly. I am sure that I am not doing anything wrong.
I try to install the intermediate—L101-1.0.4-20241205-747393-mid-flash.bin first, it tells me that the installation is successful, I wait 3 minutes and then… the led flashes once blue and once red.
I turn off the power, turn it back on after a minute, it works again but the intermediate update is not installed so it does not recognize the latest update 2.3.10”
It is impossible to update the Cudy WR1500 that I bought.
I follow the instructions exactly. I am sure that I am not doing anything wrong.
I try to install the intermediate—L101-1.0.4-20241205-747393-mid-flash.bin first, it tells me that the installation is successful, I wait 3 minutes and then… the led flashes once blue and once red.
I turn off the power, turn it back on after a minute, it works again but the intermediate update is not installed so it does not recognize the latest update 2.3.10