Cudy ruuteritel on sisseehitatud veebiliides ja see sisemine veebileht ei nõua internetiühendust. Veebihalduslehele sisselogimiseks saate ühendada oma seadme Cudy ruuteriga Wi-Fi või Etherneti kaudu.
Samm 1: Ühendage oma arvuti Cudy ruuteriga Vahejuhtmeta või kaabli kaudu.
Kui juhtmeta: Wi-Fi vaikimisi nimi ja parool on trükitud ruuteri alumisele sildile.
Kui juhtmeta: Wi-Fi vaikimisi nimi ja parool on trükitud ruuteri alumisele sildile.Kui kaabel: Ühendage arvuti ühe ruuteri tagaküljel asuva LAN-pordi külge Ethernet-kaabli abil.
Samm 2: Avage veebilehitseja (Google, Firefox, Edge jne.) ja sisestage aadressiribale http://cudy.net või http://192.168.10.1.
Samm 3: Avaneb alltoodud sisselogimisleht. Valige veebihalduslehe kuvamiskeel ja nõutav parool on "admin" või peate looma ühe parooli.
Veaotsing:
Kui sisselogimisleht ei ilmu, proovige veebilehel järgmisi tõrkeotsingu samme:
Mida teha, kui ma ei pääse oma Cudy ruuteri veebiliidesele ligi?
288 comments
Hi, the password and default password does not get me onto the system to configure the mesh system. Please help.
Dear Mark,
You can try to reset the router to factory default by long pressing the reset button for about 3 seconds. You can release the reset button when the LED flashes.
The default password of the WEB panel will recover to default “admin”. If the firmware version is 2.×.x, you need to create a new password when first login to the web page of the router.
“Hello! Can you please help me reset the router web interface password?”
Hello! Can you please help me reset the router web interface password?
@Bart,
Dear Customer,
Thank you for contacting Cudy support team.
Our technical support has sent you the solutions via email. Please check.
“For example, GL.iNet offers the option for full configuration and device management from an external IP address. Do devices like Cudy also offer this option?”
@Peter,
Dear Customer,
Thank you for contacting Cudy support team.
Our technical support has sent you the solutions via email. Please check.
“Dear Cudy,
I have a WR3000S router here. I decided to change the default LAN address which is used to log in into the admin panel of the router. I successfully changed the address from 192.168.10.1 to 192.168.0.1.
However, I somehow now have a non-cudy admin login panel on 192.168.10.1 with Alcatel banner in the upper left corner. Can I do something with it? I do not want that rouge admin panel to persist on 192.168.10.1. I only want the cudy-panel on newly assigned 192.168.0.1.”