Üldine võrgutopoloogia:
Samm 1: Pistke Range Extender pistikupessa ja oodake, kuni toitelamp on stabiilselt sisse lülitatud.
Märkus:
1. Range Extenderi seadistamisel viige see oma host-ruuterile lähemale.
2. KORRALDAGE Range Extender vaikeseadetele, et vältida liideseid.
Step 2: Ühendage Range Extenderi vaikimisi Wi-Fi, mis on avatud Wi-Fi.

Sammu 3: Käivitage veebilehitseja ja sisestage aadressiribale http://cudyre.net/ või http://192.168.10.254/.
Avaneb alljärgnev sisselogimisleht. Valige veebihalduslehe kuvamiskeel ja nõutav parool on 'admin' või peate looma ühe parooli.


Sammu 4: Avaneb aken Quick Setup, valige 'Wireless Extender', seejärel minge 'Next'.

Sepp 5: Valige oma "Ajavöönd".

Step 6: Valige host-võrk, mida soovite laiendada. Klõpsake nupule 'Connect'.

Sepp 7: Sisestage host-ruuteri traadita parool.


Note: Veenduge, et sisestatud traadita parool on õige, muidu ei õnnestu konfigureerimine.
Sepp 8: Kohandage WiFi nimi (SSID) ja parool on sama, mis teie vastuvõttevõrgus.

Sepp 9: Klõpsake 'Save &; Apply', et lõpetada konfiguratsioon.
Sepp 10: Ühendage oma traadita seadmed uuesti uue Wi-Fi võrguga.

Note:
Pärast konfigureerimist ei ole määratud IP-aadress 192.168.10.254. Cudy Extenderisse uuesti sisselogimiseks külastage 'http://cudyre.net' või leidke IP-aadress ruuteri kliendiloendist.
18 comments
@Dear Pernilla Staxered,
It is strange. What is the model and brand of the main WiFi device. I want to check it and try to test it. In addition, Please try to connect to the Range extender via cable, and login to the web page, go to “Generally Settings” -“Wireless” page to check the WiFi password. Is it correct.
If you can’t connect to the Range extender via cable, please reset it, then you can set it via the WEB page rather than the WPS button, Check if the problem fixed?
“Hello! We have bought a cudy extender and plugged it in by pressing wps on our router. The nerwork has full range and all the lights are on at the extender. However when we try to login at our iphone or television it says that we should use the same password as at the original router and it does not work. We have dubbelchecked many times. The name of the extender network is the same as the original network but ends with EXT5G or EXT2G.
It does not work with any of those two. Please help us.
Best regards, Pernilla”
@Dear mohammed widad,
The orange color means that the signal strength of the main WiFi at the location of the Cudy Range extender is not good. Is it possible to move closer to the main WiFi device to enhance the signal strength.
“I’ve finished all the configuration, but now I see the orange color in the wifi ?”
@Dear Mustafa,
If the Range Extender is working on range extender mode, the channel will be locked as the same with the main WiFi. You can’t change it.
“hi, I was wondering If I can change the channel manually”
Hello! We have bought a cudy extender and plugged it in by pressing wps on our router. The nerwork has full range and all the lights are on at the extender. However when we try to login at our iphone or television it says that we should use the same password as at the original router and it does not work. We have dubbelchecked many times. The name of the extender network is the same as the original network but ends with EXT5G or EXT2G.
It does not work with any of those two. Please help us.
Best regards, Pernilla
I’ve finished all the configuration, but now I see the orange color in the wifi ?