Cudy Whole Home Mesh süsteem on loodud selleks, et kõrvaldada surnud tsoonid ja tagada katkematu Wi-Fi kogu teie kodus. See artikkel juhendab teid samm-sammult võrgusüsteemi ehitamisel.
Esvalmistus:
1. Veenduge, et teil on vähemalt 2 Cudy toodet.
2. Kõik Cudy tooted toetavad mesh-tehnoloogiat: Home Mesh-Cudy ametlik veebisait
3. Firmware on ajakohane: Download Center
4. Võtke need seadistamise ajal samasse ruumi.
5. Võtke need samasse ruumi. Lähtestage kõik oma Cudy tooted tehaseseadetele. (Kui seade on sisse lülitatud, vajutage ja hoidke RESET-nuppu koos näpuga 6s jooksul all, seejärel laske lahti.)
6. Seadistage oma esmane ruuter ja ühendage see internetiga.
Kui näited on M1800 ja WR2100:
Samm 1: Avage veebilehitseja ja minge veebilehele http://cudy.net või http://192.168.10.1.
Üksikasjalikumalt vt Kuidas Cudy Routeri veebiliidesesse sisse logida?
Samm 2: Vajutage süsteemi oleku lehel nupule "+".
Samm 3: Vajutage M1800-l WPS-nuppu ja seejärel WR2100-l WPS-nuppu.
Pääsevõrguüksus: Välkvalge
lisavõrguüksus: Vilgub vaheldumisi valge ja punane
Samm 4: See läheb "Scanning", seejärel " Connecting".
Samm 5: Oodake, kuni lisaruuteri süsteemi LED muutub helesiniseks, seejärel paigutage WR2100 ümber.
Samm 6: Edu ja naudi võrgusilma võrku.
Märkus:
1. 4/5G ruuterit saab seadistada ainult peamise võrgusilmaüksusena. Näiteks:
2. Te ei saa sisse logida lisavõrgu võrgusilma ruuteri veebiliidesesse. Kui soovite seadeid muuta, klõpsake "Süsteemi olek"->"Mesh".
90 comments
@Bruno,
Dear Bruno,
LT500 can only work as main mesh router. Can’t work as satellite mesh router. So you can’t install mesh system with them. Please return it and buy a new Cudy Wireless router,such as WR1300 to install mesh system.
“Hello, I have a main LT500 configured, everything is OK. I just bought another one to extend wifi/cover . I tried a lot of times to add this new LT500 as a mesh (via the gui+wps buttons)…no discover…And I don’t want to use the WISP function because I want the same SSID and I want to use the mesh function…Can you help me ? Else, I’ll ask a refund for this 2nd LT500 :(”
Hello, I have a main LT500 configured, everything is OK. I just bought another one to extend wifi/cover . I tried a lot of times to add this new LT500 as a mesh (via the gui+wps buttons)…no discover…And I don’t want to use the WISP function because I want the same SSID and I want to use the mesh function…Can you help me ? Else, I’ll ask a refund for this 2nd LT500 :(
@Maciek
Dear Customer，
Thank you for contacting Cudy support team.
Sorry for the inconvenience caused to you! We have plan to add this feature next months via firmware update. It will come soon. Please wait patiently.
“The WR3600 router with the latest firmware does not have the Mesh WiFi feature.”
The WR3600 router with the latest firmware does not have the Mesh WiFi feature.
@Ahmed,
Dear Ahmed,
Sorry to tell you that WR6500 doesn’t support Mesh function now. We have plan to add this feature next month. Please wait. For now, if you plan to connect them via wired cable, you can set the WR3000 to the Access Point mode, then connect to the WR6500’s LAN port. If you plan to connect them via WiFi, you can set the WR3000 to the Wireless extender mode to connect the 5GHz WiFi of WR6500. It will work too. Then you will be able to update the new firmware to support mesh function when the new firmware release.
“I want to setup a mesh network between wr6500 (main) and my old wr3000 (satellite) but there’s no + sign on the setup page for the wr6500.
Is it possible to add that feature? If not available already and I just can’t find it. Because it’s mentioned on the product page for the wr6500 that it supports whole home mesh.”