VPN-klient on lõppseade või tarkvara, mida kasutatakse turvalise ühenduse loomiseks kasutaja ja VPN-serveri vahel.
Mida on VPN?
VPN (Virtual Private Network) aitab teil tunneltehnoloogia abil kaugelt, turvaliselt ja privaatselt internetiressurssidele ligi pääseda. VPN krüpteerib teie isikuandmed ja varjab teie IP-aadressi avalikkuse eest, kui kasutate internetti. VPN-i kasutajate jaoks näeb see välja, nagu oleksid arvutid omavahel otse ühendatud.
Üldine võrgutopoloogia:
Sealt võtame näitena WR2100.
Sepp 1: Avatakse veebilehitseja ja minnakse veebilehele http://cudy.net või http://192.168.10.1.
Detailide saamiseks vaadake Kuidas sisse logida Cudy Routeri veebiliidesesse?
Sepp 2: Klõpsake Üldised seaded->VPN ja lubage VPN.
Vaikimisi reegel: Luba kõigile seadmetele või Kõikidele seadmetele VPN-i kasutamine keelata.
Süsteemi olek-> seadmed->seadmed->VPN lubamiseks või keelamiseks.
Site-to-Site: Võimaldab kahe saidi seadmetel omavahel suhelda.
VPN-poliitika:
Katkestatud: Ei mingeid täiendavaid seadeid.
VPN kill switch: Katkestab internetiühenduse, kui VPN-ühendus on kadunud.
Domeen: Määrake, millised domeenid lähevad läbi VPN-i ja millised mitte
Remote Subnet: Määrake, millised alamvõrgud lähevad läbi VPN-i ja millised mitte
Sepp 3: Valige Protokoll nimekirjast see, mida vajate, ja sisestage oma VPN-teenuse pakkuja poolt antud VPN-teave.
- PPTP VPN
Sisestage VPN serveri aadress (näiteks 113.92.73.163) ning VPN kasutajanimi ja parool, mille teie VPN teenusepakkuja on andnud.
- L2TP VPN
Sisestage VPN serveri aadress (näiteks 113.92.73.163), VPN kasutajanimi ja parool ning teie VPN teenusepakkuja poolt antud eeljaotatud võti.
Kui teie VPN-teenusepakkuja annab teile ka tunneli IP, mis on seotud kontoga, saate lubada valiku Kasutage kohandatud tunneli IP-d.
- OpenVPN
Klikkige Browser, et importida oma VPN teenusepakkuja poolt pakutud konfiguratsioonifail.
- WireGuard VPN
Klikkige Browser, et importida oma VPN teenusepakkuja poolt pakutud konfiguratsioonifail.
Sinterneti Interface ja Peer sünkroniseeritakse automaatselt teie VPN teenusepakkuja CONF failist.
- ZeroTier Slave
Tabele ZeroTier Network ID ja Gateway, mille ZeroTier Master on andnud. Gateway on leitav VPN Status osast.
Väline artikkel: Kuidas Cudy marsruuteriga Zerotieri kaudu kaugühendust luua?-Cudy Home
141 comments
Why do call this section FAQ?
Responses like this have zero value to community!!!
-
Dear Customer,
Thank you for contacting Cudy support team.
Our technical support has contacted you via email. Please check.
@Francesco,
Dear Customer,
Thank you for contacting Cudy support team.
Our technical support has sent you the solutions via email. Please check.
“Good morning,
I bought a WR3000 Router and I configured the VPN and it’s fine except that I would like to know how to make sure that all the traffic is clear and that only for a specific site, for example “www.google.com”, everything passes under VPN. I tried to do different configurations but nothing, all traffic goes through VPN regardless of the settings, whether I put “Allow all devices” that if I put the option “Exclude all devices.”
How can I do it?
Thank you”
Good morning,
I bought a WR3000 Router and I configured the VPN and it’s fine except that I would like to know how to make sure that all the traffic is clear and that only for a specific site, for example “www.google.com”, everything passes under VPN. I tried to do different configurations but nothing, all traffic goes through VPN regardless of the settings, whether I put “Allow all devices” that if I put the option “Exclude all devices.”
How can I do it?
Thank you
@Freddy
Dear Freddy,
Thank you for contacting Cudy support team.
Sorry to tell you that No, the Cudy routers don’t support VPN cascading function now.
“Is it possible to achieve VPN cascading using a TR3000.
The configuration is:
1. A VPN server (VPN A) is set up at Site A.
2. A TR3000 is situated at Site B where the device have the VPN client enabled to connect to VPN A and VPN server (VPN B) is also enabled.
3. At Site C, client devices have VPN clients connected to VPN B.
All traffic generated by client devices at Site C is encrypted using VPN B protocol goes to TR3000. The TR3000 decrypts traffic from the clients by VPN B server and encrypts it again using VPN A protocol before sending it to VPN A. This is the solve the problem where devices at Site C do not have reliable routes to Site A directly.”
Is it possible to achieve VPN cascading using a TR3000.
The configuration is:
1. A VPN server (VPN A) is set up at Site A.
2. A TR3000 is situated at Site B where the device have the VPN client enabled to connect to VPN A and VPN server (VPN B) is also enabled.
3. At Site C, client devices have VPN clients connected to VPN B.
All traffic generated by client devices at Site C is encrypted using VPN B protocol goes to TR3000. The TR3000 decrypts traffic from the clients by VPN B server and encrypts it again using VPN A protocol before sending it to VPN A. This is the solve the problem where devices at Site C do not have reliable routes to Site A directly.