Beeta-firmavara parandab LT18, LT450, LT500, LT500D ja T-Mobile konfiguratsiooniprobleemi.

Lühiajaliselt saime tagasisidet, et meie ruuter ei saa T-Mobile'iga korralikult töötada, näiteks ei ole internetti või saab ainult IPv6 internetti jne. Me lõime beeta-firmware'i, et parandada ja parandada jõudlust.

Samm 1: Avage veebilehitseja ja minge veebilehele http://cudy.net või http://192.168.10.1. Sisestage sisselogimiseks parool.
Detailide saamiseks vaadake Kuidas Cudy Routeri veebiliidesesse sisse logida?

Samm 2: Go to Advanced Settings->Firmware to upgrade the beta firmware below.

LT18 Firmware: Cudy LT18 Software Download

LT450 Firmware

V1 (Micro SIM-kaart): LT450-R9-1.15.5beta-20221121-180014-flash.bin

V2 (Nano SIM-kaart): Cudy LT450 tarkvara allalaadimine

LT500 firmware

V1 (Micro SIM-kaart): LT500-R9-1.15.5beta-20221121-180014-flash.bin

V2 (Nano SIM-kaart): Cudy LT500 tarkvara allalaadimine

LT500D firmware

V2 (Nano SIM-kaart): Cudy LT500D tarkvara allalaadimine

Sammu 3: Advanced Settings-> IPv6 to enable IPv6, Save & Apply.


Step 4: Mine Advanced Settings -> TTL -> Custom ja sea TTL väärtuseks 65, HL väärtuseks 65.


Step 5: Mine Üldised seaded->4G/Cellular.

1. Määra Võrgurežiim kui 4G ainult

2. Määra APN profiil kui Manuaalne

3. Määra APN kui kiire.t-mobile.com (Märkus: staatilise IP-plaani puhul seadke APN-iks b2b.static)

4. Jätke username ja password tühjaks.

5. Jäta username ja password tühjaks.
. Seadistage Autentimine kui PAP+CHAP

Märkus: APN-i puhul tuleb seda kaks korda kinnitada, kuna need võivad ilma ette teatamata muutuda.


Samm 6: Salvesta & Rakenda, oota umbes 5 minutit ja kontrolli seejärel ühendust. Kui see ikka veel ei tööta, võtke ühendust support@cudy.com koos Diagnosis bin failiga. (Diagnostic Tools->Diagnosis->GO->Download)

Back to blog

32 comments

@Trey Jones,
Our technical support has sent you the solutions via email. Please check.

“Where are the links?”

Cudy support

Where are the links?

Trey Jones

@Alex,
Our technical support has contact you via email. Please check.

“Dear Cudy Team,

I wanted to share my experience regarding the latest firmware for the LT500 V2. I had been using version LT500V2-R25-1.14.26-20220801-152148 for some time without any issues. Recently, I upgraded to the latest firmware version, LT450-LT500-LT500DV2-R25-2.1.1-20240419-090237."

Cudy support

@Rebecca,
Thank you for contacting Cudy support team. You can download the firmware on the website. https://www.cudy.com/pages/download-center/lt500-2-0

But for now, there is no OpenWRT firmware on OpenWRT forum. So I think you can’t update the router to the OpenWRT firmware.

“I own a Cudy LT-500 v 2.0 router amd am requesting the latest beta version of the firmware for this router as well as the latest releases of all applicable software necessary to install OpenWRT on this device. None of the listed download links referenced in FAQ are accessible. Thank you in advance.”

Cudy support

Dear Cudy Team,

I wanted to share my experience regarding the latest firmware for the LT500 V2. I had been using version LT500V2-R25-1.14.26-20220801-152148 for some time without any issues. Recently, I upgraded to the latest firmware version, LT450-LT500-LT500DV2-R25-2.1.1-20240419-090237.

After using version 2.1.1 for about a month on the T-Mobile network, I began experiencing frequent disconnects from the cellular network, usually several times per day. To address this, I have rolled back to version 1.15.28-20230410-094349 and will monitor if the problems continue.

I wanted to report this issue regarding version 2.1.1 and provide feedback. Thank you for continuing to create excellent routers!

Alex

Leave a comment