Only Cudy routers that have been upgraded to a firmware version that supports Cudy APP management can be managed using the APP.
Therefore, it is very likely that your Cudy router has not been upgraded to a firmware version that supports APP management.
You can download the Cudy APP by scanning the QR code below.
Please download the latest firmware version to upgrade.
Model: Cudy's wireless products will gradually release new firmware to support APP management. The following table lists some product models that already support APP. Other models may have been released. Please go to the download center to check the new firmware.
| WR1300 V2 & V3 |
| M3000 |
| M1300 |
| M1200 |
| WR3000 |
| WR1200 |
| WR1500 |
| M1800 |
| X6 |
| WR1300E V2 |
| LT700E |
| LT15E |
Note: The firmware version of all the Cudy routers with 2.x.x will support Cudy APP management.
Please click here to feedback if you have any questions or advice when using Cudy APP.
31 comments
Regards
AMID
@Dear George,
You can login the web page of the router on your phone. You will see the VPN function. For Cudy APP, we will add it on next APP update, please wait patiently.
“I have the WR3000 with the latest firmware 2.4.19, but the app doesn’t have an option in settings for VPN. It goes WAN, LAN, Wi-Fi, etc, but nothing for VPN. I can activate/deactivate it just fine from PC, but I want to be able to do it from my mobile. From what I saw, there is supposed to be a setting for VPN too.”
I have the WR3000 with the latest firmware 2.4.19, but the app doesn’t have an option in settings for VPN. It goes WAN, LAN, Wi-Fi, etc, but nothing for VPN. I can activate/deactivate it just fine from PC, but I want to be able to do it from my mobile. From what I saw, there is supposed to be a setting for VPN too.
I have bought a Cudy C200P to control 4 ap3000 cudy but i would like to understand how i can manage it from the cudy app ( it doesn’t recognize the controller) and how i can set up a guest ssid that doesn’t have access to my lan.
Thank you
@Dear +584245982552,
Our technical support has sent you the solutions via email. Please check.
“Cuando actualizo el enrutador WR1500 de la versión 1.0.4-20241017-804431 a la última versión, solo parpadea y nunca se apaga, solo cuando lo desconecto de la electricidad.”