Important Notice: November 24, 2025
Cudy AX3000 series routers manufactured starting in November 2025 (TR3000, SN code start with 2543 or later. 2543 in the SN means the 43th week in the year 2025 ) use the new Flash F50L1G41LC. Upgrading to older versions of OpenWrt intermediate firmware or OpenWrt firmware will prevent the device from booting. Therefore, we will be releasing new firmware updates for these products to add restrictions. If the device is detected to be using the new Flash, it will not be able to upgrade to older firmware versions 2.3.X or earlier. Additionally, previously provided OpenWrt intermediate firmware for older Flash devices will not be compatible.
Affected models include: AP3000 Outdoor 1.0, AP3000 Wall 1.0, M3000 1.0/2.0, TR3000 1.0, WR3000E 1.0, WR3000H 1.0, WR3000S 1.0, and WR3000P 1.0.
Cudy has released the new OpenWrt intermediate firmwares, which have been updated to Google Drive. Please switch to the new intermediate firmware.
Regarding the OpenWrt firmware, we are still waiting for the official OpenWrt forum to release an OpenWrt firmware compatible with the new Flash. Once released, please use the new OpenWrt firmware.
If the SN code is less than 2543. It uses the old flash. There is no such problem.
Warnings
This webpage lists software of devices which support OpenWrt system, before download and install the software, please note that OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.
Description
- This file can only be used when your router works under Cudy web UI.
- If the router already works under OpenWRT UI, user should restore it to Cudy official firmware first. And then upgrade the router with this firmware.
- How to restore the router to Cudy official firmware? Please read the readme in the file downloaded.
Warranty:
Cudy hereby declares
- We, Cudy, do not undertake warranty for any software that is not released by Shenzhen Cudy Technology Co., Ltd.
- We do not assume any warranty for products that have installed any software not released by Shenzhen Cudy Technology Co., Ltd.
- If you need to use openwrt software, we suggest you download it from Cudy's official website.
Download OpenWrt Firmware to Remove Signature Check: Drive
OpenWrt Firmware Finder (Not Released by Cudy): OpenWrt Firmware Selector
895 comments
Hello
For WR3000-IL, is there any way to know before opening the box if it is V1.0 or V2.0?
This way I can return the unopened box and get refuund if it is V2.0
Thanks
Shai
Please build the firmware under openwrt for the WBR3000AUX
@Dear Sidney,
Our technical support has sent you the firmware via email. Please check.
“Hi, i don’t see a AP3000 Ceiling OpenWRT intermediate firmware. How do i flash it to install openWRT ?”
@Dear JC
Our technical support has contacted you via email. Please check.
“Hi,
I have the same problem as Manos on Nov 20th except I have a WR3000H.
“wanted to do Cudy WR3000 on OpenWRT and I installed the WR3000+V1 without recovery TFTP file. After it was completed, it told me to wait for the reboot, it never happened, it told me that I am not connected and now the cudy wr3000 does not start at all, it does not connect to any ip 192.168.1.1 or 192.168.10.1. What can I do?”
This cudy_wr3000h-v1-sysupgrade_20251119.bin file was not supposed to do this, I think.”
@Dear ABDULLAH,
We have plan to add the DNS over HTTPS on next firmware update 2.5.×. The IOT network will be later.
“Cudy M3000 1.0 kindly please add DNS over HTTPS. I’ve seen TP-Link Deco X50 has got it via firmware update but not my Cudy M3000 1.0 have it yet.
Also, my Cudy M3000 1.0 don’t have separate network creation for IoT devices!! TP-Link has this feature!!!"