A VPN client is a terminal device or software used to establish a secure connection between a user and a VPN server.
What is VPN?
VPN (Virtual Private Network) helps you access internet resources remotely, securely, and privately with tunneling technology. The VPN encrypts your personal information and hides your IP address from the public when you use the internet. To the users of the VPN, it will look like the computers were directly connected to each other.
Common Network Topology:
Here we take WR2100 as a demonstration.
Step 1: Open a web browser and go to http://cudy.net or http://192.168.10.1.
For details, please refer to How to log into the web interface of Cudy Router?
Step 2: Click on General Settings->VPN and enable VPN.
Default Rule: Allow all devices or Ban all devices to use VPN.
To specify the device, click on System Status-> Devices->VPN to enable or disable it.
Site-to-Site: Allow the devices in two sites to communicate with each other.
VPN Policy:
Disable: No additional setting.
VPN kill switch: Turn off the Internet connectivity when the VPN connection is lost.
Domain: Specify which domains go through the VPN and which don't
Remote Subnet: Specify what subnets go through the VPN and which don't
Step 3: In the Protocol list, select the one you need and enter the VPN information provided by your VPN provider.
• PPTP VPN
Enter the VPN server address (for example, 113.92.73.163) and the VPN Username and password provided by your VPN provider.
• L2TP VPN
Enter the VPN server address (for example 113.92.73.163), VPN username and password, and pre-shared key provided by your VPN provider.
If your VPN provider also provides you the tunnel IP which binds with the account, you can enable the Use custom tunnel IP option.
• OpenVPN
Click on Browser to import the configuration file provided by your VPN provider.
• WireGuard VPN
Click on Browser to import the configuration file provided by your VPN provider.
The Interface and Peer will synchronize automatically from your VPN Provider's CONF File.
• ZeroTier Slave
Type in the ZeroTier Network ID and Gateway provided by the ZeroTier Master. The Gateway can be found on VPN Status part.
Related Article: How to remote connect Cudy Router via Zerotier?-Cudy Home
138 comments
@Dear TEN,
Sorry, please tell me details about the problem you encountered.
“Any developments or requests for information as to “WR3000E FW 2.4.7 doesn’t auto-reconnect dropped WireGuard and may leak IP despite VPN kill switch (in WISP at least)”, currently on Comments pages 3 & 4 below?”
Any developments or requests for information as to “WR3000E FW 2.4.7 doesn’t auto-reconnect dropped WireGuard and may leak IP despite VPN kill switch (in WISP at least)”, currently on Comments pages 3 & 4 below?
@Dear Mike,
Is there any difference betweem AmneziaWG VPN and standard Wireguard VPN? Can you send us some introduction about AmneziaWG VPN?
“I do support question about AmneziaWG VPN. Is there a possibility that you’ll add this protocol in future versions?”
I do support question about AmneziaWG VPN. Is there a possibility that you’ll add this protocol in future versions?
@Dear Sewil,
Please try to update the router to the latest firmware version first. Then check if the problem fixed?
“Hi
I tried to run OpenVPN Client on CUDY WR300H.
Unfortunately after uploading configuration file and login/pwd I’m receiving message
“daemon.err openvpn(client)18653: Options error: Unrecognized option or missing or extra parameter(s) in /etc/openvpn/client/client.ovpn:10: gro (2.5.2)”
How I can fix it ?”