What is Access Point Mode?
Access Point mode is the router uses a wired connection to the primary router or modem router to expand the wireless coverage for a home network.
Common network topology:
Step 1: Open a web browser and go to http://cudy.net or http://192.168.10.1.
For details, please refer to How to log into the web interface of Cudy Router?
Step 2: The Quick Setup window will pop up, choose 'Wireless Access Point', then click 'Next'.
Step 3: Choose your 'Time Zone'.
Step 4: Confirm the hardware connection.
Step 5: Change the wireless network name and password.
Step 6: Click "Save & Apply" to complete the configuration.
Step 7: Wait a few seconds for the system rebooting, when the login page pops up again, you can enjoy the internet.
Note:
After setting up the Cudy router into Access Point mode, the IP address will be assigned by the host router and the default IP Address 192.168.10.1 will not able to log in. If you need to log into Cudy router again, type 'http://cudy.net' into your browser or look up the Cudy router's IP address in your main (primary) router's client list.
63 comments
Me sale mal porque no se configurarlo
@Dear Amid,
Sorry, the router doesn’t support MAC filter function when working in AP mode.
“WR3000h V1 multiple WIFI IN MY NETWORK I need to activate the MAC filter feature in AP mode of this device”
WR3000h V1 multiple WIFI IN MY NETWORK I need to activate the MAC filter feature in AP mode of this device
@Dear Ben,
Please follow the steps:
1. Disconnect the cable of that connect the WAN port of the WR3000 to the main router. 2. Login to the web page of WR3000, Set it to Wireless Access Point mode.
3. Disable the DHCP server on the “Advanced Settings” page.
4. Connect the WR3000 to the LAN port of the main router.
Then check if the problem fixed?
Hi, recently bought the WR3000 and want to use it as access point. I can reach the internet with connected device while using the factory settings, but as soon as I do the quick setup it loses the connection to the internet router. The WR3000 and the internet router are connected by cable.