Gängige Netzwerktopologie:
Schritt 1: Stecken Sie den Range Extender in die Wandsteckdose und warten Sie, bis die Betriebsanzeige dauerhaft leuchtet.
Notiz:
1. Wenn Sie den Range Extender einrichten, bringen Sie ihn näher an Ihren Host-Router heran.
2. ZURÜCKSETZENden Range Extender auf die Standardeinstellungen zurücksetzen, um Schnittstellen zu vermeiden.
Schritt 2:Verbinden Sie sich mit dem Standard-WLAN des Range Extenders, das ein offenes WLAN ist.
Schritt 3Starten Sie einen Webbrowser und geben Sie Folgendes ein:http://cudyre.net/oderhttp://192.168.10.254/in der Adressleiste.
Die unten stehende Anmeldeseite wird angezeigt. Wählen Sie die Anzeigesprache der Web-Verwaltungsseite. Das angeforderte Passwort lautet:Administratoroder Sie müssen ein Passwort erstellen.
Schritt 4:Das Fenster „Schnelleinrichtung“ wird angezeigt, wählen Sie „Wireless-Verstärker, dann geheNächste'Die
Schritt 5:Wählen Sie Ihr "Zeitzone".
Schritt 6:Wählen Sie das Hostnetzwerk aus, das Sie erweitern möchten. Klicken Sie auf „Verbinden'Die
Schritt 7:Geben Sie das WLAN-Passwort des Host-Routers ein.
Notiz:Stellen Sie sicher, dass das eingegebene WLAN-Passwort korrekt ist, andernfalls kann die Konfiguration nicht erfolgreich sein.
Schritt 8:Passen Sie den WLAN-Namen (SSID) an; das Passwort ist dasselbe wie für Ihr Host-Netzwerk.
Schritt 9:Klicken Sie auf 'Speichern & Anwendenum die Konfiguration abzuschließen.
Schritt 10:Verbinden Sie Ihre drahtlosen Geräte erneut mit dem neuen WLAN-Netzwerk.
Notiz:
Nach der Konfiguration lautet die zugewiesene IP-Adresse nicht 192.168.10.254. Um sich erneut bei Cudy Extender anzumelden, besuchen Sie „http://cudyre.net“ oder suchen Sie die IP-Adresse in der Clientliste des Routers.
22 Kommentare
@Dear Neil,
Our technical support has contacted you via email. Please check.
“I recently purchased a Cudy RE1200 UK_2.0 Range Extender. It never gets an ip address from ZTE F660 fiber router in my home. The DHCP host list has other devices ip address entries but not an ip address entry for CUDY RE1200 device. Power LED stays solid blue. Signal LED slow flashing red. 2.4G and 5G wifi signals are ok but no Internet. Vendor’s tecnician tried in many ways to connect it it to my home ZTE F660 2.4G fiber router, but it never gets an ip address from the ZTE router, meaning no internet when connected to RE1200 Extendee wifi signal. It has been checked by the vendor’s technician in his workshop, and he says it’s connecting to internet and working ok at his worksop meaning the device is not faulty. Device has the latest firmware, and I am out of my wits. Can you help ?. Thanks.”
I recently purchased a Cudy RE1200 UK_2.0 Range Extender. It never gets an ip address from ZTE F660 fiber router in my home. The DHCP host list has other devices ip address entries but not an ip address entry for CUDY RE1200 device. Power LED stays solid blue. Signal LED slow flashing red. 2.4G and 5G wifi signals are ok but no Internet. Vendor’s tecnician tried in many ways to connect it it to my home ZTE F660 2.4G fiber router, but it never gets an ip address from the ZTE router, meaning no internet when connected to RE1200 Extendee wifi signal. It has been checked by the vendor’s technician in his workshop, and he says it’s connecting to internet and working ok at his worksop meaning the device is not faulty. Device has the latest firmware, and I am out of my wits. Can you help ?. Thanks.
@Dear Konstantin,
You must connect the LAN/WAN port of Cudy router to the main router via ethernet cable after changing the LAN/WAN port to WAN status.
“Hello
I have a Cudy LTE N300 Wi‑Fi router, and it has the option to connect via a SIM card. I have a SIM card connected, but it has a 50 GB limit, and I also have a cable with unlimited home internet. Can I somehow switch the priority to the cable in the Cudy app settings, rather than to the SIM card? Or is this impossible, and this router isn’t suitable for me?
I specifically want to distribute unlimited internet via a cable.
If I select WAN in the LAN/WAN section of the advanced settings, the connection is completely lost, and the connection type still shows as “mobile router”.
Can you help me?
Thank you in advance.”
Hello
I have a Cudy LTE N300 Wi‑Fi router, and it has the option to connect via a SIM card. I have a SIM card connected, but it has a 50 GB limit, and I also have a cable with unlimited home internet. Can I somehow switch the priority to the cable in the Cudy app settings, rather than to the SIM card? Or is this impossible, and this router isn’t suitable for me?
I specifically want to distribute unlimited internet via a cable.
If I select WAN in the LAN/WAN section of the advanced settings, the connection is completely lost, and the connection type still shows as “mobile router”.
Can you help me?
Thank you in advance.
@Dear Greg,
Our technical support has sent you the solutions via email. Please check.
“My RE3000 worked well for almost two years. Then problem started. Not passing internet connection. WIFI signal stays ok, byt no internet. Power off/on was helping for some time. The process keep getting worse. Initially once a month, than once or twice a week.
Updates are automatic, the newest version is loaded.
When I reset everthing to factory settings and started from the beginning as stated here on the help pages, all looked ok.
The wifi , ssid, all works. works but no internet.
On the status page all stays green, looks great. However without forwarding any internet.
What else can I do?”