Прошивки OpenWrt

I need to open ssh on cudy Lt500
I could not find any image for that

@Dear Cudy team,
I can’t use the TR3000. V1_20251118.zip in the Google Drive. Since this is the OpenWRT version 24.10.4. I wrote about it that it will turn my Cudy TR3000 “into a brick”, since my Cudy already has a new flash chip (indicated by SN number). I need a new version from you – 24.10.5, I asked when this version will be available? or if it exists, how and where can I find it?

“@Dear Alexander996,
The intermediata firmware is TR3000 V1_20251118.zip in the Google Drive. Please download it and update.

“Dear Cudy team. I want to flash my Cudy TR3000 router (serial number TR30002545, that is, with a new flash memory chip). And I need OpenWRT version 24.10.5. But you don’t have this version on google drive (there is only 24.10.4), which will turn my Cudy TR3000 into a brick. When will the official release “transitional” version of OpenWRT 24.10.5 from cudy? So that I can upgrade/flash my Cudy router? Could you please send me the official version, which is suitable for my model (with new flash memory chips)?”

@Dear Michael,
You can try to recover the old firmware version. Such as the 2.0.0, 2.2.6. Please connect the LAN port when recovering the firmware.

“Hi Cudy Support Team , I have purchased cudy wr3000 v1 router at the end of y 2023 ,I’ve successpully installed openwrt on my router using intermideate Cudy firmware, that was about 2 years ago. Then year after at 2024 ,I decided to go back to Cudy’s official firmware using OpenWrt system update and latest official firware at that moment .But something went wrong ( as I understood, there was some internal flash incompatibility with newer firmwares and older routers caused by internal flash)
As for today 2026 , my WR3000 v1 router is bootlooping endlessly but I’m able to upload firmware using tftp64.
What I’ve tried:
– Uploading latest official firmware v WR3000-R31-2.4.19 via tftp64 (using WAN port and LAN1 port )
– Uploading itermideate firmware from google drive , using tftp64 via LAN1 port and WAN port ,
– Uploading latest openwrt firmware v24.10.5 using tftp64 via WAN and LAN1 port .
- Uploading openwrt kernel only firmware based on v24.10.5 via WAN and LAN1 port .
Only when uploade official Cudy firmware ,the device rebooted itself autoamtically afer 3-4 minutes. In all cases the device is bootloping after manual or automatic restart.
Do you have any suggestions ? Maybe some firwmare to restore the device ?”

@Dear Frank,
The intermediate firmware WR3000S 1.0.zip is in the Google Drive.
“Hi again cudy team.
My bad, I was pretty sure I’ve downloaded the right image for wr3000s, looked several times and took me a while to realize it isn’t. Nevertheless learned R59/R53 error message is true about wrong image. Looking forward to sharing more beneficial content moving forward with OpenWRT on wr3000s.”

@Dear Alexander996,
The intermediata firmware is TR3000 V1_20251118.zip in the Google Drive. Please download it and update.

“Dear Cudy team. I want to flash my Cudy TR3000 router (serial number TR30002545, that is, with a new flash memory chip). And I need OpenWRT version 24.10.5. But you don’t have this version on google drive (there is only 24.10.4), which will turn my Cudy TR3000 into a brick. When will the official release “transitional” version of OpenWRT 24.10.5 from cudy? So that I can upgrade/flash my Cudy router? Could you please send me the official version, which is suitable for my model (with new flash memory chips)?”