Предупреждения
На этой веб-странице перечислено программное обеспечение устройств, поддерживающих систему OpenWrt. Прежде чем загружать и устанавливать программное обеспечение, обратите внимание, что OpenWrt Project — это операционная система Linux, предназначенная для встроенных устройств. Вместо того, чтобы пытаться создать единую статическую прошивку, OpenWrt предоставляет полностью доступную для записи файловую систему с управлением пакетами. Это освобождает вас от выбора и настройки приложений, предоставляемых поставщиком, и позволяет настроить устройство с помощью пакетов для соответствия любому приложению. Для разработчиков OpenWrt — это платформа для создания приложения без необходимости создания на его основе полноценной прошивки; для пользователей это означает возможность полной настройки и использования устройства непредвиденными способами.
Описание
<ол>Гарантия:
Кади настоящим заявляет
<ол>Загрузите прошивку OpenWrt для удаления проверки подписи: Диск
Поиск прошивки OpenWrt (не выпущен Cudy): Выбор прошивки OpenWrt
Комментариев: 904
@Dear Marek M.
Thank you for contacting Cudy support team. Thank you for your kindly advice. We will provide your feedback to the product department for evaluation. I think we will do better about this.
“Would it be possible for Cudy to test all new official firmware releases to accept the intermediate firmware, without the extra step to downgrade to the old version first (then intermediate firmware, and finally full OpenWrt – flashing 3 times total)? Flashing is time consuming (imagine an ISP doing mass deployment for customers – small ISP like me, not big enough to order your hardware with OpenWrt pre-installed from factory) and each time there is also some risk of bricking the device (power failure etc.), better do it as few times as possible, ideally just make the official firmware accept OpenWrt sysupgrade images directly (maybe just with a warning that it’s not official, warranty void and ask the user for extra confirmation). If the reason for signed firmware is that you’re worried about possible security issues (like malicious remote hacked OpenWrt installs), the extra confirmation could require physical button press (similar to recent MikroTik RouterOS device-mode). Not complaining here, it’s already great that you support OpenWrt, many thanks for that but the process could be made even easier – thanks!”
@cruday,
Our technical support has sent you the firmware via email. Please check.
“hi, I need cudy_ap3000indoor-v1-sysupgrade.bin…outdoor doesnt work”
@Dear Luis,
Our technical support has contacted you via email. Please check.
“Hi, Thank you for the fast answer.
Already flashed the file indicated (2.0) and it keeps saying the same… FILE IS INVALID… Any idea?
Thanks in advance.”
Would it be possible for Cudy to test all new official firmware releases to accept the intermediate firmware, without the extra step to downgrade to the old version first (then intermediate firmware, and finally full OpenWrt – flashing 3 times total)? Flashing is time consuming (imagine an ISP doing mass deployment for customers – small ISP like me, not big enough to order your hardware with OpenWrt pre-installed from factory) and each time there is also some risk of bricking the device (power failure etc.), better do it as few times as possible, ideally just make the official firmware accept OpenWrt sysupgrade images directly (maybe just with a warning that it’s not official, warranty void and ask the user for extra confirmation). If the reason for signed firmware is that you’re worried about possible security issues (like malicious remote hacked OpenWrt installs), the extra confirmation could require physical button press (similar to recent MikroTik RouterOS device-mode). Not complaining here, it’s already great that you support OpenWrt, many thanks for that but the process could be made even easier – thanks!
hi, I need cudy_ap3000indoor-v1-sysupgrade.bin…outdoor doesnt work