1. Скачайте последнюю версию прошивки из центра загрузок.
2. Разархивируйте скачанный файл.
3. Включите устройство Cudy и дождитесь, когда начнёт непрерывно гореть индикатор.
4. Подключитесь к сети устройства Cudy по Wi-Fi или по кабелю Ethernet.
5. Введите в адресной строке браузера http://cudy.net или http://192.168.10.1.
6. Обновите прошивку.
Способ А. Перейдите в раздел Дополнительные настройки 🡢 Прошивка и выберите файл, который вы извлекли из ранее скачанного архива.
Способ Б. Перейдите в раздел Общие настройки 🡢 Прошивка и обновите прошивку через интернет или выберите локальный файл.
7. Подождите около пяти минут, пока роутер перезагрузится.
Комментарии: 181
@Estimado Snheider:
Intente cambiar el navegador web para actualizar el router. Le sugiero que utilice Chrome o Edge.
Si sigue sin funcionar, pruebe con otro ordenador.
“Ya e intentado 2 veces actualizar mi router ax1500, una vez que hago todo los paso, se cae la conexión a internet hasta que lo apagó, cuando lo enciendo todo normal pero en la misma versión que estaba”
Firmware EU 1.0 (Official .bin)
Ya e intentado 2 veces actualizar mi router ax1500, una vez que hago todo los paso, se cae la conexión a internet hasta que lo apagó, cuando lo enciendo todo normal pero en la misma versión que estaba
@Dear Sakis,
Please try to change the web browser to update the router. I suggest the chrome or edge.
If still fail, please try to change a computer.
“It is impossible to update the Cudy WR1500 that I bought.
I follow the instructions exactly. I am sure that I am not doing anything wrong.
I try to install the intermediate—L101-1.0.4-20241205-747393-mid-flash.bin first, it tells me that the installation is successful, I wait 3 minutes and then… the led flashes once blue and once red.
I turn off the power, turn it back on after a minute, it works again but the intermediate update is not installed so it does not recognize the latest update 2.3.10”
It is impossible to update the Cudy WR1500 that I bought.
I follow the instructions exactly. I am sure that I am not doing anything wrong.
I try to install the intermediate—L101-1.0.4-20241205-747393-mid-flash.bin first, it tells me that the installation is successful, I wait 3 minutes and then… the led flashes once blue and once red.
I turn off the power, turn it back on after a minute, it works again but the intermediate update is not installed so it does not recognize the latest update 2.3.10