На роутерах Cudy со слотом для сим-карты имеется порт WAN/LAN. Если порт WAN/LAN работает в режиме WAN, то при сбое основного подключения (по кабелю) активируется резервное подключение 4G (сотовая связь).
Шаг 1. Убедитесь, что настроено подключение 4G.
Шаг 2. Введите в адресной строке браузера http://cudy.net или http://192.168.10.1.
Шаг 3. Перейдите в раздел Дополнительные настройки 🡢 LAN/WAN.
Шаг 4. Нажмите кнопку Переключиться на WAN; роутер перезагрузится.
Шаг 5. Подключите один конец кабеля Ethernet к порту WAN/LAN роутера, а другой — к интернет-розетке или модему.
Шаг 6. После завершения настройки новое состояние будет отображаться в разделе Состояние системы.
Комментариев: 18
Hallo,
ich habe das gleiche Problem wie hier am 02.08.2025 geschildert:
“Hello I have internet being fed from another router (“Network A”) to my Cudy LTE Modem/Router (“Network B”). If Network A loses internet but is still working as a network (just no internet). The Cudy LTE failover does not kick in because it does not realize the internet is down. I tried changing the online detection settings but that did not work.”
@Dear H，
Our technical support has contacted you via email. Please check.
“Hello I have internet being fed from another router (“Network A”) to my Cudy LTE Modem/Router (“Network B”). If Network A loses internet but is still working as a network (just no internet). The Cudy LTE failover does not kick in because it does not realize the internet is down. I tried changing the online detection settings but that did not work.”
Hello I have internet being fed from another router (“Network A”) to my Cudy LTE Modem/Router (“Network B”). If Network A loses internet but is still working as a network (just no internet). The Cudy LTE failover does not kick in because it does not realize the internet is down. I tried changing the online detection settings but that did not work.
@Dear Molon,
The function depends on the “Advanced Setting” —“Online Check” function. Did you disable it. If yes, please enable it.
“Hello, first my cuddy Lte n300 working well on 4g. My point is I configure WAN, and when I put my câble, the router switch on WAN/4G. Until now everything is working as expected but if my main router has a connectivity issue, the cuddy router still continu to work on WAN whereas there is no more connectivity. So I don’t see the automatic switch on 4G”
Hello, first my cuddy Lte n300 working well on 4g. My point is I configure WAN, and when I put my câble, the router switch on WAN/4G. Until now everything is working as expected but if my main router has a connectivity issue, the cuddy router still continu to work on WAN whereas there is no more connectivity. So I don’t see the automatic switch on 4G