Примечание. Если устройство работает в режиме Точка доступа, гостевая сеть будет недоступна.
Шаг 1. Введите в адресной строке браузера http://cudy.net или http://192.168.10.1.
Шаг 2. Перейдите в раздел Дополнительные настройки 🡢 Гостевая сеть.
Шаг 3. Создайте гостевую сеть. По умолчанию гостевые сети Cudy не защищены паролем и называются Cudy-Guest-2.4G или Cudy-Guest-5G.
Шаг 4. Установите для параметра Шифрование значение WPA-PSK/WPA2-PSK (смешанный режим) и создайте пароль.
Шаг 5. Нажмите на кнопку Сохранить и применить. Гостевая сеть создана!
Комментариев: 90
@Dear tonalt,
Our technical support has sent you the solutions via email. Please check.
“it seems that an activated mac-filter also has an effect on the guest-network in the sense that the router doesn’t connect a guest to the internet! LT700E.
i think most people don’t like this and even worse: the activated mac filter on the guest network is not editable and it even worser it doesn’t use the mac table that is defined for the main wifi network.
so the mac filter is completely useless if one allows a guest-network.
probably i am wrong and the guest network can connect a guest to the internet with an activated mac-filter. but if so, please tell what i can do, to achieve this.”
it seems that an activated mac-filter also has an effect on the guest-network in the sense that the router doesn’t connect a guest to the internet! LT700E.
i think most people don’t like this and even worse: the activated mac filter on the guest network is not editable and it even worser it doesn’t use the mac table that is defined for the main wifi network.
so the mac filter is completely useless if one allows a guest-network.
probably i am wrong and the guest network can connect a guest to the internet with an activated mac-filter. but if so, please tell what i can do, to achieve this.
@Dear John,
You will find the Guset Network function if you set the router to work on Wireless Router mode or WISP mode. There is no Guset Network function if you set the router to work on other modes.
“WR1300
No Guest network button available
Firmware 2.4.4”
WR1300
No Guest network button available
Firmware 2.4.4
@Dear Carlos,
What is the model are you talking about? Cudy routers don’t support this function. Cudy APs can support this.