Примечание. Если устройство работает в режиме Точка доступа, гостевая сеть будет недоступна.
Шаг 1. Введите в адресной строке браузера http://cudy.net или http://192.168.10.1.
Шаг 2. Перейдите в раздел Дополнительные настройки 🡢 Гостевая сеть.
Шаг 3. Создайте гостевую сеть. По умолчанию гостевые сети Cudy не защищены паролем и называются Cudy-Guest-2.4G или Cudy-Guest-5G.
Шаг 4. Установите для параметра Шифрование значение WPA-PSK/WPA2-PSK (смешанный режим) и создайте пароль.
Шаг 5. Нажмите на кнопку Сохранить и применить. Гостевая сеть создана!
Комментариев: 88
I have a Cudy WR3000 set up with a guest network, but the problem is that devices connected to the guest network can see and communicate with each other, and I can’t find any option to disable this behavior. Of course, they are separated from the main LAN but devices on the guest network should not discover each other, specifically for IoTs. I know that on OpenWrt it’s just a matter of checking a box (isolate clients or similar), but I can’t find where the option is in Cudy or which firmware version offers this feature. Can you help me?
@Dear Brain,
I need some more information to fix this issue.
1.What are the firmware version of your WR1500 and AP3000?
2. How do you install mesh system with them? via ethernet cable or wireless backhaul?
“I have setup mesh network with Cudy WR1500 as a Router Mode, and 2 items Cudy AP3000 as satelite mode.
I want to enable Guest WIFI and already setup the SSID with 2,4 Ghz and 5Ghz, but the SSID Guest WiFi cannot connect in my phone in Samsung A56 5G, error message (cannot get IP address).
Do you have any suggestion ?”
I have setup mesh network with Cudy WR1500 as a Router Mode, and 2 items Cudy AP3000 as satelite mode.
I want to enable Guest WIFI and already setup the SSID with 2,4 Ghz and 5Ghz, but the SSID Guest WiFi cannot connect in my phone in Samsung A56 5G, error message (cannot get IP address).
Do you have any suggestion ?
@Dear Nick,
Sorry, doesn’t support this feature now. We have provided your feedback to our Product Manager for evaluating.
“I have the WR1500 with firmware 2.3.10-20251215-170019. The guest network does not go through the vpn. All the rest of the network uses it normally. Is there a way to have the guest use the vpn as well?
Thank you!”
I have the WR1500 with firmware 2.3.10-20251215-170019. The guest network does not go through the vpn. All the rest of the network uses it normally. Is there a way to have the guest use the vpn as well?
Thank you!