Шаг 1. Введите в адресной строке браузера http://cudy.net или http://192.168.10.1. Используйте в качестве пароля слово admin.
Шаг 2. Перейдите в раздел Дополнительные настройки 🡢 Общий доступ к USB.
Шаг 3. Переведите переключатель Включить во включённое положение. Введите в поле Пароль пароль для доступа к USB-накопителю.
Шаг 4. Нажмите на кнопку Сохранить и применить, чтобы завершить настройку.
Шаг 5. После завершения настройки USB-накопитель будет доступен по следующему адресу:
Windows
\\cudy.net или \\192.168.10.1
macOS
//cudy.net или smb://192.168.10.1
Linux
//cudy.net или smb://192.168.10.1
Комментариев: 48
But through Windows, in Add a network location at \\85.2…My IP address\sda3, I can see my drive)
1. Port forwards – TCP\UPD – WAN – 445 – 192.168.10.1 – 445
2. Firewsll is disabled in Windows and the router.
3. On the website https://ru.infobyip.com/ftptest.php it says “Unable to connect to FTP server 85.238….”
4. My IP address is verified white and publicly static.
@Dear Pavlo,
1. Please tell me how do you set on the portforword.
2. Please check if the firewall of the FTP server is allowed the traffic of the FTP server, you can try to disable the firewall and test.
3. Please check if the FTP server can access the internet via the WR1300S?
“Hello.
I have a CudyWR1300S router.
I enabled port forwarding.
But I can’t access the FTP server using my external static IP address.
Can you tell me how to access the USB drive from the internet?”
Hello.
I have a CudyWR1300S router.
I enabled port forwarding.
But I can’t access the FTP server using my external static IP address.
Can you tell me how to access the USB drive from the internet?
@Dear Dmitry,
Our technical support has contacted you via email. Please check.
“@Support,
Firmware version: 2.3.2-20241226-105607
Hardware: WR1300S V1.0
Maybe WR1300S in AP mode cannot provide USB sharing service?”