Шаг 1. Введите в адресной строке браузера http://cudy.net или http://192.168.10.1.
Шаг 2. Откроется окно Быстрой настройки. Выберите режим WISP и нажмите кнопку Далее.
Шаг 3. Выберите свой часовой пояс.
Шаг 4. Выберите основную сеть, которую надо расширить, и нажмите кнопку Подключиться.
Либо перейдите в раздел Общие настройки 🡢 WISP и нажмите кнопку Включить, затем выберите основную сеть, которую надо расширить.
Шаг 5. Введите пароль основной сети.
Шаг 6. Оставьте имя и пароль сети Wi-Fi по умолчанию или измените их.
Шаг 7. Нажмите кнопку Сохранить и применить, чтобы завершить настройку.
Шаг 8. Дождитесь завершения перезагрузки. Готово!
Комментариев: 120
@Dear Daniel,
I just tested it. WR1500 takes about 1 minute to reconnect to the main Wi-Fi.
“I was curious about WISP reconnection time on WR1500. I plan to use phone wifi hotspot as WISP source. Can i expect immediate connection once i turn on phone hotspot? How long does it take to find my phone and connect to it? Also, if connection is lost, how fast cudy will reconnect to phone hotspot once it turned on again?”
I was curious about WISP reconnection time on WR1500. I plan to use phone wifi hotspot as WISP source. Can i expect immediate connection once i turn on phone hotspot? How long does it take to find my phone and connect to it? Also, if connection is lost, how fast cudy will reconnect to phone hotspot once it turned on again?
@Dear Wills,
Our technical support has sent you the firmware via email. Please check.
“Hi, can you send me WISP firmware for WR3600? thanks!”
Hi, can you send me WISP firmware for WR3600? thanks!
@Dear Wisperer,
OK. I see. The new firmware for WR3600 is under testing. We will release new firmware recently. Please wait patiently.
“Hi Cudy Support.
Im using already the Beta Firmware 2.5.5b for my WR3600 1.0 for being able to use WISP.
I found a Little bug:
Through the Cudy App i can disable WIFI completely but when trying to enable it again I get „invalid params“ error and it doesn’t get enabled again.
Through the webinterface, everything works.
Is there maybe a newer beta than 2.5.5b that addresses this issue already? Or when will there be official 2.5.X firmware?
If there is newer firmware can you provide please?!
Thank you"