Шаг 1. Введите в адресной строке браузера http://cudy.net или http://192.168.10.1.
Шаг 2. Откроется окно Быстрой настройки. Выберите режим Точка доступа и нажмите кнопку Далее.
Шаг 3. Выберите часовой пояс.
Шаг 4. Проверьте подключение.
Шаг 5. Измените имя и пароль сети Wi-Fi.
Шаг 6. Нажмите кнопку Сохранить и применить.
Шаг 7. Дождитесь, когда завершится перезагрузка. Готово!
Примечание. После включения режима «Точка доступа» на роутере Cudy, его IP-адрес будет присвоен вышестоящим роутером, и для входа в веб-интерфейс нельзя будет использовать IP-адрес по умолчанию (192.168.10.1). Чтобы выполнить вход в веб-интерфейс роутера Cudy, когда он выступает в роли точки доступа, введите в адресной строке браузера http://cudy.net или найдите IP-адрес роутера Cudy в списке клиентов вышестоящего роутера.
Комментариев: 60
@Rob,
Yes, we have this plan. We have developed the Multi-SSID function now. But VLAN function are still in development.
“Hi all,
have a quick Question, you have Businiess AP´s like the AP3000 which is pretty nice, that are not to be capable of VLANs and or multiple SSIDs? Or do you have a roadmap when implemented? without this features is just a home AP”
Hi all,
have a quick Question, you have Businiess AP´s like the AP3000 which is pretty nice, that are not to be capable of VLANs and or multiple SSIDs? Or do you have a roadmap when implemented? without this features is just a home AP.
@Dear Tolotra,
For Cudy routers, the WAN port will work as LAN port if you set it to AP mode. Please have a try.
“Why not letting the wan port usable in AP mode, 3 ports is very handicapping”
Why not letting the wan port usable in AP mode, 3 ports is very handicapping
@Daouda
Cher Daouda,
Veuillez suivre les étapes suivantes :
1. Connectez-vous à la page web de Cudy. Définissez l’adresse IP LAN sur une adresse IP statique. Par exemple, si l’adresse IP LAN de Mikrotik est 192.168.1.1, vous pouvez configurer Cudy sur 192.168.1.254, masque 255.255.255.0, passerelle 192.168.1.1 et DNS 192.168.1.1.
2. Désactivez le serveur DHCP de Cudy.
Vérifiez ensuite si le problème est résolu ?
“Bonsoir a tous , j’espère que vous vous portez bien.
Au fait j’ai configuré mon antenne Cudy AC 1200 en mode point d’accès sans fil. Au début ça fonctionnait correctement, mais après une journée de fonctionnement, lorsque les clients essaie de se connecter, le portail captif de mon mikrotik au quel est connecté l’antenne ne s’affiche pas. Ç’est ma deuxième antenne qui fonctionne de cette manière. Vraiment j’ai besoin d’aide.”