Шаг 1. Введите в адресной строке браузера http://cudy.net или http://192.168.10.1.
Шаг 2. Откроется окно Быстрой настройки. Выберите режим Точка доступа и нажмите кнопку Далее.
Шаг 3. Выберите часовой пояс.
Шаг 4. Проверьте подключение.
Шаг 5. Измените имя и пароль сети Wi-Fi.
Шаг 6. Нажмите кнопку Сохранить и применить.
Шаг 7. Дождитесь, когда завершится перезагрузка. Готово!
Примечание. После включения режима «Точка доступа» на роутере Cudy, его IP-адрес будет присвоен вышестоящим роутером, и для входа в веб-интерфейс нельзя будет использовать IP-адрес по умолчанию (192.168.10.1). Чтобы выполнить вход в веб-интерфейс роутера Cudy, когда он выступает в роли точки доступа, введите в адресной строке браузера http://cudy.net или найдите IP-адрес роутера Cudy в списке клиентов вышестоящего роутера.
Комментариев: 60
Can I use two routers (WR1300) in same network and same SSID in AP mode? Do I need to configure channels manually etc?
@Connie Alderson,
Our technical support has replied you via email.
“I have a Cudy Router/Extender that was installed by someone for me. My WiFi would only work where the Router was upstairs, had no connection downstairs where my WiFi comes in (I have Starlink). My son was able to by that and I have basically two different WiFi connections depending on location in the house. What he was not able to do was create a password when using Cudy as the WiFi. I have not been able to figure out a way to do that. Information I have found does not work. Can you help? Thanks”
I have a Cudy Router/Extender that was installed by someone for me. My WiFi would only work where the Router was upstairs, had no connection downstairs where my WiFi comes in (I have Starlink). My son was able to by that and I have basically two different WiFi connections depending on location in the house. What he was not able to do was create a password when using Cudy as the WiFi. I have not been able to figure out a way to do that. Information I have found does not work. Can you help? Thanks
TSHOLOFELO I suggest you to describe your requirements in detail to supportcudy.com. I will check.
“How do I connect this because I’m trying to check if it will back up my fibre in case of lights off. I tried everything”
How do I connect this because I’m trying to check if it will back up my fibre in case of lights off. I tried everything