Шаг 1. Введите в адресной строке браузера http://cudy.net или http://192.168.10.1.
Шаг 2. Перейдите в раздел Общие настройки 🡢 VPN и переведите переключатель Включить в подразделе VPN во включённое положение.
Чтобы включить (отключить) VPN для конкретных устройств, перейдите в раздел Состояние системы 🡢 Устройства и переведите переключатель VPN напротив нужного устройства в нужное положение.
Шаг 3. В выпадающем списке параметра Протокол выберите нужный протокол и настройте параметры согласно указаниям поставщика VPN-услуг.
PPTP
Введите адрес VPN-сервера (например, 113.92.73.163), а также имя пользователя и пароль, предоставленные поставщиком VPN-услуг.
L2TP
Введите адрес VPN-сервера (например, 113.92.73.163), а также имя пользователя, пароль и ключ PSK, предоставленные поставщиком VPN-услуг.
Если поставщик VPN-услуг также предоставляет IP-адрес для привязки учётной записи, активируйте параметр Использовать пользовательский IP-адрес туннеля.
OpenVPN
Нажмите на кнопку Обзор... и импортируйте файл настроек, полученный от поставщика VPN-услуг.
WireGuard
Нажмите на кнопку Обзор... и импортируйте файл настроек, полученный от поставщика VPN-услуг.
Поля подразделов Интерфейс и Одноранговый узел будут заполнены автоматически с помощью файла настроек (CONF) поставщика VPN-услуг.
ZeroTier
Введите нужные значения в поля Идентификатор сети ZeroTier и Шлюз.
Комментариев: 196
Request for Help: LANCOM to Cudy LT700 VPN Connection Issue
Hello everyone,
I have a LANCOM 1800VAW modem with built-in IPsec IKEv2 VPN. I’ve successfully established a VPN connection from LANCOM to Cudy LT700. From the Cudy LT700 side, I can access the LANCOM public network and reach all devices on its internal network.
However, the issue is that from the LANCOM 1800VAW, I cannot access the Cudy LT700 modem or its local network. Due to software limitations, I’m unable to apply advanced configurations on the Cudy modem anymore.
I would really appreciate any assistance or suggestions to help resolve this issue.
Thank you in advance,
Fernando
Sorry, i have two cudy lt500 v2 with lastest firmware
Hello, I have two cudy lt400 routers, I need to connect them through zerotier , the máster and slave zero tier router are connected through a 4g chip, I ping the máster zerotier’s IP from another PC from slave router, the ping does not respond. The other way around neither. Please!!
@yilmar londoño,
Dear Customer.
Thank you for contacting Cudy support team.
Please check if the Cellular IP address is a public IP address? As shown nelow. If the public IP address is the same as the IP Address? If not the same, the Cellular IP address is not a public IP address, then you can’t access the router from the internet. You can try to ask the ISP if they can offer you a public IP address.
Hello, I have two cudy lt400 routers, I need to connect them through wireguard, the server router is connected through a 4g chip, when creating the client and the server, the client never connects to the server, I ping the server’s public IP from another network, the ping does not respond, could this be the problem?
Hello, I have two cudy lt400 routers, I need to connect them through wireguard, the server router is connected through a 4g chip, when creating the client and the server, the client never connects to the server, I ping the server’s public IP from another network, the ping does not respond, could this be the problem?