Шаг 1. Введите в адресной строке браузера http://cudy.net или http://192.168.10.1.
Шаг 2. Перейдите в раздел Общие настройки 🡢 VPN и переведите переключатель Включить в подразделе VPN во включённое положение.
Чтобы включить (отключить) VPN для конкретных устройств, перейдите в раздел Состояние системы 🡢 Устройства и переведите переключатель VPN напротив нужного устройства в нужное положение.
Шаг 3. В выпадающем списке параметра Протокол выберите нужный протокол и настройте параметры согласно указаниям поставщика VPN-услуг.
PPTP
Введите адрес VPN-сервера (например, 113.92.73.163), а также имя пользователя и пароль, предоставленные поставщиком VPN-услуг.
L2TP
Введите адрес VPN-сервера (например, 113.92.73.163), а также имя пользователя, пароль и ключ PSK, предоставленные поставщиком VPN-услуг.
Если поставщик VPN-услуг также предоставляет IP-адрес для привязки учётной записи, активируйте параметр Использовать пользовательский IP-адрес туннеля.
OpenVPN
Нажмите на кнопку Обзор... и импортируйте файл настроек, полученный от поставщика VPN-услуг.
WireGuard
Нажмите на кнопку Обзор... и импортируйте файл настроек, полученный от поставщика VPN-услуг.
Поля подразделов Интерфейс и Одноранговый узел будут заполнены автоматически с помощью файла настроек (CONF) поставщика VPN-услуг.
ZeroTier
Введите нужные значения в поля Идентификатор сети ZeroTier и Шлюз.
Комментариев: 196
Kindly add support for AmnesiaWG for cudy routers especially in client mode.
@Dear bledad,
Is there any introduction about the netmaker client function?
“hello , it’s possible add netmaker client on next firmware ?”
hello , it’s possible add netmaker client on next firmware ?
@Dear Thanos,
Our technical support has contacted you via email. Please check.
“Hello,
I’m having a recurring problem with my Cudy WR3600 router. When I have my VPN (WireGuard/ProtonVPN) enabled, the connection keeps dropping repeatedly throughout the day, sometimes just seconds or minutes after reconnecting. When this happens, all internet access on my network stops working until the VPN reconnects.
Router details:
- Model: WR3600
- Firmware: 2.3.16-20251119-115836
I’ve already tried:
- Changing the MTU setting
- Using a completely new VPN configuration file
- Disconnecting devices I suspected might be causing interference
None of these fixed it. Based on the router’s logs, the issue seems related to a hardware table on the router filling up, but I could not find any setting in the web interface to address this, and I don’t have SSH access available either.
Could you please help me troubleshoot this, or let me know if this is a known issue with a fix available (firmware update or otherwise)?"
Hello,
I’m having a recurring problem with my Cudy WR3600 router. When I have my VPN (WireGuard/ProtonVPN) enabled, the connection keeps dropping repeatedly throughout the day, sometimes just seconds or minutes after reconnecting. When this happens, all internet access on my network stops working until the VPN reconnects.
Router details:
- Model: WR3600
- Firmware: 2.3.16-20251119-115836
I’ve already tried:
- Changing the MTU setting
- Using a completely new VPN configuration file
- Disconnecting devices I suspected might be causing interference
None of these fixed it. Based on the router’s logs, the issue seems related to a hardware table on the router filling up, but I could not find any setting in the web interface to address this, and I don’t have SSH access available either.
Could you please help me troubleshoot this, or let me know if this is a known issue with a fix available (firmware update or otherwise)?