Download do software OpenWrt

Avisos

Esta página lista softwares de dispositivos compatíveis com o sistema OpenWrt. Antes de baixar e instalar o software, observe que o Projeto OpenWrt é um sistema operacional Linux voltado para dispositivos embarcados. Em vez de tentar criar um firmware único e estático, o OpenWrt oferece um sistema de arquivos totalmente gravável com gerenciamento de pacotes. Isso o libera da seleção e configuração de aplicativos fornecidas pelo fornecedor e permite que você personalize o dispositivo por meio do uso de pacotes para se adequar a qualquer aplicação. Para desenvolvedores, o OpenWrt é a estrutura para construir um aplicativo sem a necessidade de construir um firmware completo em torno dele; para usuários, isso significa a capacidade de personalização completa, para usar o dispositivo de maneiras nunca antes imaginadas.

Descrição

  1. Este arquivo só pode ser usado quando o seu roteador funciona na interface web do Cudy.
  2. Se o roteador já estiver funcionando com a interface OpenWRT, o usuário deverá restaurá-lo para o firmware oficial da Cudy primeiro. Em seguida, atualizar o roteador com este firmware.
  3. Como restaurar o roteador para o firmware oficial da Cudy? Leia o arquivo leia-me no arquivo baixado.

Garantia:

Cudy declara por meio deste

  1. Nós, da Cudy, não oferecemos garantia para nenhum software que não seja lançado pela Shenzhen Cudy Technology Co., Ltd.
  2. Não assumimos nenhuma garantia para produtos que tenham instalado qualquer software não lançado pela Shenzhen Cudy Technology Co., Ltd.
  3. Se você precisar usar o software openwrt, sugerimos que você o baixe do site oficial da Cudy.

Baixe o firmware OpenWrt para remover a verificação de assinatura:Dirigir

Localizador de firmware OpenWrt (não lançado pela Cudy):Seletor de Firmware OpenWrt 

Voltar para o blog

1319 comentários

нет прошивки на WBR3000UAX. где её можно скачать ?

Андрей

Hi Jaddie, even going back to 2.0.0 did not work here. Still getting the file is invalid message. A 2nd hand Aruba is on its way to me now, if it works then there will be some Cudy kit going on eBay!

Jon

Jon Fear

I have two Cudy M1800 with firmware version 2.1.3-20240509-102323. I tried to use the file in M1800+V2.zip. However, it says “Not applicable!Please upload the firmware applicable to the following models.” if I try to update firmware from Advance Settings → Firmware. If I try to update the firmware of a specific model, it says “File is invalid. Please retry.”. I have tried downgrading the firmware version of the M1800 devices to 1.16.14-20231117-190903. It gives the same error. What should I do?

Muhammed Tasnim Bin Anwar

@Support & @Jon
That seems to be working, Jon if you follow the 2nd link they gave, there is a 2nd place to update the firmware which works, the normal one errored for me too, but doing it where the 2nd guide shows it is now rolling back to v2.0.0 at which point openwrt should install

Jaddie

Following the openwrt saga. I have several M3000 v1 units and cannot load ANY openwrt file, even with original FW back to 2.0.0. This is very frustrating and I am openly thinking about replacing the whole system (4x M3000, 1x AP3000 Out)… I need separate wireless networks and being limited to 2.4 and 5 is useless… I need a separate 2.4 network for IOT as well as a separate 5 network for IOT, a merged 2.4/5 for everything else and then a guest network…

Jon Fear

Deixe um comentário