Avisos
Esta página lista softwares de dispositivos compatíveis com o sistema OpenWrt. Antes de baixar e instalar o software, observe que o Projeto OpenWrt é um sistema operacional Linux voltado para dispositivos embarcados. Em vez de tentar criar um firmware único e estático, o OpenWrt oferece um sistema de arquivos totalmente gravável com gerenciamento de pacotes. Isso o libera da seleção e configuração de aplicativos fornecidas pelo fornecedor e permite que você personalize o dispositivo por meio do uso de pacotes para se adequar a qualquer aplicação. Para desenvolvedores, o OpenWrt é a estrutura para construir um aplicativo sem a necessidade de construir um firmware completo em torno dele; para usuários, isso significa a capacidade de personalização completa, para usar o dispositivo de maneiras nunca antes imaginadas.
Descrição
- Este arquivo só pode ser usado quando o seu roteador funciona na interface web do Cudy.
- Se o roteador já estiver funcionando com a interface OpenWRT, o usuário deverá restaurá-lo para o firmware oficial da Cudy primeiro. Em seguida, atualizar o roteador com este firmware.
- Como restaurar o roteador para o firmware oficial da Cudy? Leia o arquivo leia-me no arquivo baixado.
Garantia:
Cudy declara por meio deste
- Nós, da Cudy, não oferecemos garantia para nenhum software que não seja lançado pela Shenzhen Cudy Technology Co., Ltd.
- Não assumimos nenhuma garantia para produtos que tenham instalado qualquer software não lançado pela Shenzhen Cudy Technology Co., Ltd.
- Se você precisar usar o software openwrt, sugerimos que você o baixe do site oficial da Cudy.
Baixe o firmware OpenWrt para remover a verificação de assinatura:Dirigir
Localizador de firmware OpenWrt (não lançado pela Cudy):Seletor de Firmware OpenWrt
903 comentários
I need Cudy Intermediate OpenWRT firmware for AP3000 V1.0, could you upload it or email it to me?
@markus,
Our technical support has sent you the firmware via email. Please check.
“may i also ask for the firmware for AP3000 indoor v1, thanks.”
@Aleksey,
Our technical support has sent you the firmware via email. Please check.
“Hello, how can I get Cudy Intermediate OpenWRT Firmware for my AP3000 V1.0? Thanks”
@Степан,
Пожалуйста, сначала обновите прошивку вашего WR1300 V3.0 до 2.0.4, вы можете скачать ее на сайте ниже.
https://www.cudy.com/pages/download-center/wr1300-3-0
“Не дает прошится на OpenWRT пишет файл заблокирован.
Файл заблокирован. Пожалуйста, повторите попытку.
Загруженный файл: openwrt-24.10.0-ramips-mt7621-cudy_wr1300-v3-squashfs-sysupgrade.bin
Размер: 7.25 MB (7602797 B)
MD5: f6690ce248413d580e4a32efa448fc57”
@shohabmsk,
The firmware in Google drive is not a used version, it is just a intermediate firmware to update to the official version. Do not use it as a normal firmware.
“M1300 v2 openwrt-
The one in your Google drive, it has no issue in Ethernet to PC connection. But one issue is pppoe-wan Mac is different from stock ROM.
The one in official Openwrt (24.10.1) has issue with Ethernet connection. When I connect the router with my laptop with Ethernet cable, the Ethernet cable gets detected but no ip address or no internet. But internet works fine with Ethernet connected from onu to router. But it’s 100mbps showing in openwrt status page, not 1000mbps or 1gbps!
But in other ways official openwrt 24.10.1 is more stable than the Google drive openwrt.”