Avisos
Esta página lista softwares de dispositivos compatíveis com o sistema OpenWrt. Antes de baixar e instalar o software, observe que o Projeto OpenWrt é um sistema operacional Linux voltado para dispositivos embarcados. Em vez de tentar criar um firmware único e estático, o OpenWrt oferece um sistema de arquivos totalmente gravável com gerenciamento de pacotes. Isso o libera da seleção e configuração de aplicativos fornecidas pelo fornecedor e permite que você personalize o dispositivo por meio do uso de pacotes para se adequar a qualquer aplicação. Para desenvolvedores, o OpenWrt é a estrutura para construir um aplicativo sem a necessidade de construir um firmware completo em torno dele; para usuários, isso significa a capacidade de personalização completa, para usar o dispositivo de maneiras nunca antes imaginadas.
Descrição
- Este arquivo só pode ser usado quando o seu roteador funciona na interface web do Cudy.
- Se o roteador já estiver funcionando com a interface OpenWRT, o usuário deverá restaurá-lo para o firmware oficial da Cudy primeiro. Em seguida, atualizar o roteador com este firmware.
- Como restaurar o roteador para o firmware oficial da Cudy? Leia o arquivo leia-me no arquivo baixado.
Garantia:
Cudy declara por meio deste
- Nós, da Cudy, não oferecemos garantia para nenhum software que não seja lançado pela Shenzhen Cudy Technology Co., Ltd.
- Não assumimos nenhuma garantia para produtos que tenham instalado qualquer software não lançado pela Shenzhen Cudy Technology Co., Ltd.
- Se você precisar usar o software openwrt, sugerimos que você o baixe do site oficial da Cudy.
Baixe o firmware OpenWrt para remover a verificação de assinatura:Dirigir
Localizador de firmware OpenWrt (não lançado pela Cudy):Seletor de Firmware OpenWrt
1319 comentários
Hi and thanks for the reply, however, as previously stated, I’m on firmware version v2.3.8. Should I downgrade to v2.0.0?
Thanks once again
@Jens,
Please try to update the 2.0.0 first, you can download it on the website below.
https://www.cudy.com/pages/download-center/m3000-1-0
The try again.
“Hi,
I bought a 2pc M3000 1.0 kit and I’m trying to flash the devices with OpenWRT.
While initiating the process (Advanced Settings > System > Firmware) with cudy_m3000-v1-sysupgrade.bin, I get the error “Not applicable! Please upload the firmware applicable to the following models.”
I’m on v2.3.8. Please advise.
Thank you.”
Thank you, Cudy and your hard working people, for offering these migration images and compatibility with OpenWRT. I am delighted with my new WR3000S.
Hi,
I bought a 2pc M3000 1.0 kit and I’m trying to flash the devices with OpenWRT.
While initiating the process (Advanced Settings > System > Firmware) with cudy_m3000-v1-sysupgrade.bin, I get the error “Not applicable! Please upload the firmware applicable to the following models.”
I’m on v2.3.8. Please advise.
Thank you.
@Steve
Hi Steve,
OK. I have uploaded it to the Google Drive.
“Dear Cudy team,
thanks for providing the migration image for the M1200. It works as expected.
Can you please upload it to the Google drive?
Remarks if someone uses it:
- The image can be flashed from the OEM web interface while the device is connected to the LAN port (lower port)
- After flashing the migration image, connect the LAN cable to the WAN port (upper port)
- OpenWrt is now accessible via http://192.168.1.1
- A official OpenWrt image can be flashed now
- After flashing the official OpenWrt image, connect the LAN cable to the LAN port (lower port)
- OpenWrt is now accessible via http://192.168.1.1
Best Regards
Steve"