Avisos
Esta página lista softwares de dispositivos compatíveis com o sistema OpenWrt. Antes de baixar e instalar o software, observe que o Projeto OpenWrt é um sistema operacional Linux voltado para dispositivos embarcados. Em vez de tentar criar um firmware único e estático, o OpenWrt oferece um sistema de arquivos totalmente gravável com gerenciamento de pacotes. Isso o libera da seleção e configuração de aplicativos fornecidas pelo fornecedor e permite que você personalize o dispositivo por meio do uso de pacotes para se adequar a qualquer aplicação. Para desenvolvedores, o OpenWrt é a estrutura para construir um aplicativo sem a necessidade de construir um firmware completo em torno dele; para usuários, isso significa a capacidade de personalização completa, para usar o dispositivo de maneiras nunca antes imaginadas.
Descrição
- Este arquivo só pode ser usado quando o seu roteador funciona na interface web do Cudy.
- Se o roteador já estiver funcionando com a interface OpenWRT, o usuário deverá restaurá-lo para o firmware oficial da Cudy primeiro. Em seguida, atualizar o roteador com este firmware.
- Como restaurar o roteador para o firmware oficial da Cudy? Leia o arquivo leia-me no arquivo baixado.
Garantia:
Cudy declara por meio deste
- Nós, da Cudy, não oferecemos garantia para nenhum software que não seja lançado pela Shenzhen Cudy Technology Co., Ltd.
- Não assumimos nenhuma garantia para produtos que tenham instalado qualquer software não lançado pela Shenzhen Cudy Technology Co., Ltd.
- Se você precisar usar o software openwrt, sugerimos que você o baixe do site oficial da Cudy.
Baixe o firmware OpenWrt para remover a verificação de assinatura:Dirigir
Localizador de firmware OpenWrt (não lançado pela Cudy):Seletor de Firmware OpenWrt
1319 comentários
Dear Support,
Trying to flash OpenWRT on M1300 v2. Whenever I flash the intermediate firmware from G Drive, using WebGUI>Firmware, it flashes and reboots. But then I cant reach the device, neither via LAN nor WiFi. Only the white(or bluish) led is on after reboot, and stalls in that state kind of being bricked.
The only way back was to push latest Cudy firmware via tftpd64.
Tried more than several times, and if this helps, sometimes the device downloads the firmware from tftpd immediately, which is like, sometimes it reboots into a ‘firmware download’ state, I guess.
What am i missing, why would you think the device stalling after the regular method?
Thanks,
I am wanting to flash openWRT onto an AP3000 however I can’t see an option for the device on the google drive link. Is there a version for the AP3000? Thanks
Добрый день, нужна прошивка OpenWrt для CUDY LT500D, можете выслать? Либо прошивка для разблокировки подписи, чтоб попробовать собрать свой OpenWRT.
@GRZEGORZ ANDRZEJCZYK,
Cudy routers don’t support to set the WiFi speed when working on official firmware, If you have updated the OpenWrt firmware of the router, you can try to find it on the web page.
Or you can just change the WiFi mode, such as 802.11b and 802.11 a to working on a lower speed.
“It loaded fine and I made a bridge between the fishing sonar and the phone. I just don’t know how, reduce the wifi speed to 1Mbit or 6Mbit to have better range?”
It loaded fine and I made a bridge between the fishing sonar and the phone. I just don’t know how, reduce the wifi speed to 1Mbit or 6Mbit to have better range?