Avisos
Esta página lista softwares de dispositivos compatíveis com o sistema OpenWrt. Antes de baixar e instalar o software, observe que o Projeto OpenWrt é um sistema operacional Linux voltado para dispositivos embarcados. Em vez de tentar criar um firmware único e estático, o OpenWrt oferece um sistema de arquivos totalmente gravável com gerenciamento de pacotes. Isso o libera da seleção e configuração de aplicativos fornecidas pelo fornecedor e permite que você personalize o dispositivo por meio do uso de pacotes para se adequar a qualquer aplicação. Para desenvolvedores, o OpenWrt é a estrutura para construir um aplicativo sem a necessidade de construir um firmware completo em torno dele; para usuários, isso significa a capacidade de personalização completa, para usar o dispositivo de maneiras nunca antes imaginadas.
Descrição
- Este arquivo só pode ser usado quando o seu roteador funciona na interface web do Cudy.
- Se o roteador já estiver funcionando com a interface OpenWRT, o usuário deverá restaurá-lo para o firmware oficial da Cudy primeiro. Em seguida, atualizar o roteador com este firmware.
- Como restaurar o roteador para o firmware oficial da Cudy? Leia o arquivo leia-me no arquivo baixado.
Garantia:
Cudy declara por meio deste
- Nós, da Cudy, não oferecemos garantia para nenhum software que não seja lançado pela Shenzhen Cudy Technology Co., Ltd.
- Não assumimos nenhuma garantia para produtos que tenham instalado qualquer software não lançado pela Shenzhen Cudy Technology Co., Ltd.
- Se você precisar usar o software openwrt, sugerimos que você o baixe do site oficial da Cudy.
Baixe o firmware OpenWrt para remover a verificação de assinatura:Dirigir
Localizador de firmware OpenWrt (não lançado pela Cudy):Seletor de Firmware OpenWrt
1319 comentários
Hello,
Like many happy TR3000 owners I embarked on the journey to flash the new toy with Cudy’s temperary OpenWrt firmware that helps removing signature check down the road. Download and unzip worked well, but Firmware Upgrade failed with error “File is invalid. Please retry.
Uploaded File: cudy_tr3000-v1-sysupgrade.bin
Size: 12.63 MB (13241929 B)
MD5: b8333d8eebd067fcb43bec855ac22364”
Firmware Version 2.3.9-20250208-171917
Hardware TR3000 256MB FLASH V1.0
Thanks
Hi again, I’ve recovered the router. Now can you send me the correct Firmware to Remove Signature Check for WR3000 to work as an access point?
@Dear Omar,
The OpenWrt firmware is not developed by Cudy but by the developers. We need the OpenWrt forum official support the router at first, then we can release a middle firmware for you, then you can use and upgrade to the OpenWrt firmware. Thanks!
“Hello
I need a Firmware to Remove Signature Check for WR1500
I would like to develop an openwrt for it?
I hope if you can send to me the file via my email
Regards"
@Dear Filippo,
Our technical support has sent you the firmware via email. Please check.
“Hi I’ve an AP3000 celling mount, but I cannot find any fw to port me to openwrt please help me Model AP3000 2,5G EU1.0”
@Dear Vasilis,
Please refer to this article on the website to recover the router.
https://www.cudy.com/blogs/faq/how-to-recovery-the-cudy-router-from-openwrt-firmware-to-cudy-official-firmware?pos=1&_sid=6290d8065&ss=r
“Hi, i’ve got the WR3000 which I use it as an access point. The only file(Firmware to Remove Signature Check) in Drive is the one without recovery. After installing it everything stopped working. No access to router and the ip of the router doesn’t ping. On my main router’s list of connected devices, before the above firmware’s installation, Cudy was showing but after it shows “OpenWrt”.It seems something stuck.
Pls send me the correct file with the recovery file with it.”