4-Port Gigabit Industrial Switch with 2 SFP Slots Model: IG1004S2
-
Dual Power Supply
This industrial Ethernet switch support dual redundant power supply. Each of the power supplies will have the capacity to run the device on its own. This makes sure that the switch could operate normally even if one power supply fails.
Note: This product does not include a power adapter.
Wide Temperature Operation
IG1004S2 industrial Ethernet switches are designed with wide temperature support to ensure operation reliability in extreme temperatures ranging from -40ºC to 85ºC.
IP40 Protection
4-Port unmanaged industrial ethernet switch adopts with high strength IP40 protective housing, industrial EMC design to increase the reliability of communication network.
Specifications
Model IG1004S2 Interface 4-Port RJ-45 auto-MDI / MDI-X Performance Specification Bandwidth: 20Gbps
Packet Buffer Memory:2Mbit
Packet Forwarding Rate:15Mpps
MAC Address Table: 8KInstallation DIN rail Maximum Frame Size 9000bytes packet size Flow Control Back pressure for half duplex, IEEE 802.3x pause frame for full duplex Enclosure IP40 aluminum housing LED Indicator Power: Red
Fiber: Link 2(Green)
Ethernet: YellowPower Input 12 to 52V DC redundant power ( Note: This product does not include a power adapter.) Power Consumption < 3 watts Surge protection ±4KV Network Protocols IEEE802.3 10BASE-T;
IEEE802.3i 10Base-T;
IEEE802.3u 100Base-TX/FX;
IEEE802.3ab 1000Base-T;
IEEE802.3z 1000Base-X;
IEEE802.3xNetwork cables 10BASE-T: Cat 3, 4, 5 UTP (≤100 meter)
100BASE-TX: Cat 5 or later UTP (≤10 meter)
1000BASE-TX: Cat 6 or later UTP (≤100 meter)MTBF >300,000 hours Dimensions (W x D x H) 143.7 x 103 x 44.2 mm Weight Product Weight: 0.36KG Packing Weight: 0.46KG Working Environment Working temperature: -40~85℃
Storage temperature: -40~85℃
Relative Humidity: 5%~95 % (no condensation) -
-
● 4 x Gigabit Ethernet and 2 x SFP Port
● Multi-Mode up to 2km
● Single-Mode up to 20km/40km/60km/80km
● IP40 aluminum housing
● Supports 6KV DC Ethernet ESD protection
● Supports 6KV DC EFT protection for power line
● Free Fall, Shock and Vibration Stability
● DIN-rail design
● Multi-Mode up to 2km
● Single-Mode up to 20km/40km/60km/80km
● IP40 aluminum housing
● Supports 6KV DC Ethernet ESD protection
● Supports 6KV DC EFT protection for power line
● Free Fall, Shock and Vibration Stability
● DIN-rail design